load cell simulator

    - Inner resolution:60,000 code

    - Outer resolution:0.0001mV/V

    - Output range:0~2mV/V

Non-linearity: 0.005%F.S
    - Output precision at FS: 0.01%F.S(25)

    - Output temperature rate at FS: 5ppm/

XY1 load cell simulator adopts high precision DA converter, able to simulate various output signals
from strain gauge load cells of weighing, pressing, ergometering, accumulation and so on. Output
range of the simulator is from 0~2.0000mV/V and non-linearity is <0.005%FS. It's widely applied to verify and check weighing indicator and so on alike measuring instrument connected to strain gauge
load cell.
 - Able to simulate standard output signal
   from strain gauge load cell of weighing, 
   pressing
 - Able to set display segment of decrease
   or increase(F0 mode)
 - Able to output signal in accordance with
   value set by key (F1 mode)
 - Able to output signal grade by grade in accordance with set range(F2 mode)
 - Able to detect environment temperature
 - Able to measure excitation of the indicator measured
 - Able to program by key
 - Able to program by PC,then download the program by serial port
 - Able to execute user defined program, output signal in accordance with program, 
   simulate the working procedure of auto weighing instrument
 - Work with excitation power from indicator

Able to program by PC,then download the program by serial port

  • Country:Vietnam
  • telephone:84-021-50847898
Able to program by PC,then download the program by serial port
*Your name:
*Your Email:
*To:YAOHUA WEIGHING
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters Remaining: 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

We do inquire for you , please wait ...

Load Cell Signal High-speed Collector

TCHS load cell signal high speed collector is used to capture very short instantaneous force, the highest frequency can reach 3500 times per second, suitable for continuous force measurement, instant force measurement, impact force testing and other test occasions. 1. The load ...

Come From Anhui Tianguang Sensor Co.,Ltd

Load Cell Digital Module

Digital modules are used to transform traditional analog sensors into digital sensors. Support Modbus RTU protocol, support TG ONE data acquisition management software, support customer custom communication protocol. Specification of Load Cell Digital Module Technical Parameter ...

Come From Anhui Tianguang Sensor Co.,Ltd

Load Cell Amplifiers

The weighing amplifier/transmitter is a signal amplification device. Usually used in conjunction with a sensor, the load cell sensor amplifier can convert the mV signal output by the load cell into an analog current/voltage signal or a digital signal to output to the back-end ...

Come From Anhui Tianguang Sensor Co.,Ltd