Cell Phone Signal Booster Ps60-Cel 800 MHz Extender Amplifier

   

THIS WIRELESS EXTENDER MODEL WORKS FOR CELLULAR PHONES ON THE 824-894 MHz BANDWIDTH ONLY. IF YOU DO NOT HAVE A CELL PHONE OPERATING ON THIS FREQUENCY, PLEASE DO NOT PURCHASE THIS ITEM.

Frequency: 824-894 MHz Only

>=2bars

>=2bars

>=1bar

>=3bars

Required Outdoor signal Strength

<=4

<=4

<=3

<=5

Signal/Noise

Bottom of Form

<=2500 sq ft

Top of Form

Bottom of Form

<=2300 sq ft

Top of Form

Bottom of Form

<=3200 sq ft

Top of Form

Bottom of Form

<=2100 sq ft

Top of Form

Coverage

63dB

65dB

73dB

60dB

Sys. Gain

2500Xe

PS60-CEL

PS70-CEL

YX500-CEL

spotwave

PowerSignal

Wi-Ex

Performance Comparison of similar products

Of cause there are many other specs that measure many other different aspects of the system. However, for end users, System gain and Noise are two main parameters that determine the quality of a booster.

Noise means how badly the system creates noises. If a booster introduces too much noise, it would actually amplify noises instead of signals.  The lower the number, the better the booster can pick up a weak signal.

System gain measures how powerful the Booster system can amplify the electric waves at its operation frequency. It is booster gain plus antenna gain minus cable loss. So, with better antennas and cables, you can get a little more gains. Total Antenna gains are usually under 8dB, the loss for 50ft long cable is around -4dB.

Freauency Band determines which frequency of signals will be amplified. In North America, there are currently two frequency bands than wireless phone services operated within. One is CELL 824 - 894 MHz, the other is PCS 1850-1990 MHz.

Key Parameters that you should Care about

 

Even though the concept is simple, it is still a little challenge to make a good booster. The cell phone signals are tiny electric waves at very high frequencies.  A very low level of noises, which are introduced during the boosting process, can significantly distort the original signals or interfere with the signals at other frequency spectrum. It is also hard to boost signals evenly on the frequency band.  Any time lags caused by the process can make the signal useless as well.

Signal Boosters improve cell phone coverage by capturing the weak signals at certain frequency range and then amplifying the signals. Boosters do not process the signal, so they cannot distinguish signals and noises. They just simply amplify everything in their operation frequency range.

How All Signal Boosters Work?

Noise: <=4(PS60-CEL); <=3(PS70-CEL)
Output Power: <0.5 Watt EiRP (w/ included antenna)
Unit weight: 1 lb.
Unit size: 5" x 6" x12"
Power input: 100-120 VAC 60 Hz
Power output: 5VDC, 1.5A
Signal antenna cable: Outdoor rated 75 ohm DBS satellite coaxial cable
Base unit antenna: 50 ohm, TNC male
FCC Approved
Industry Canada Approved
UL Approved
Patents pending.

Please visit Enter your zip code and locate your service provider to find the coverage frequency in your service area. If both 850 MHz, 1900 MHz is listed, it is most likely 850MHz.

Technical Specs:
Frequency: 824 - 894 MHz (Cellular)
Networks: CDMA, GSM, and TDMA AMPS, GPRS, EDGE, 1xRTT, EVDO
Total Signal Gain: 60dB (PS60-CEL); 73dB (PS70-CEL)

You will need a different PowerSignal products for iDENTM (trademark Motorola), NextelTM (trademark Nextel Communications Corp), or some 1900 MHz services.

Works with Cingular, Verizon, Sprint, T-Mobile, Alltel, cellular one, roger, bell and any wireless operator in the frequency range of 824 - 894 MHz or CELL.

Designed to boost signal strength and ensure reliable coverage for cell phones, PDAs and laptop air cards.

Designed to boost signal strength for cell phones, PDAs and laptop air cards in the frequency range of 824-894 MHz or CELL

  • Frequency:824 - 894 MHz
  • dB:65dB
  • Color:red
  • Model Number:PS-CELL60
  • Brand Name:PowerSignal
  • Place of Origin:California United States
  • Country:United States
  • telephone:1-909-9790067
Delivery Time: 2 weeks max
Package: One unit per box, 5 boxes per Carton
Supply Ability: 10000 Set/Sets per Month
Minimum Order Quantity: 5 Set/Sets
Payment Terms: L/C,D/A,D/P,T/T,Western Union,MoneyGram,PayPal
Port: Los Angeles
FOB Price: US $110 - 140
Frequency: 824 - 894 MHz
dB: 65dB
Color: red
Model Number: PS-CELL60
Brand Name: PowerSignal
Place of Origin: California United States
*Your name:
*Your Email:
*To:horwey
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters Remaining: 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

We do inquire for you , please wait ...