GSM Alarm System (T-201)

#9*69+ Four passwords + #,After inputting this order,this system is cleared and recovered as original defaultSiren sound accompany, phonic alarm, siren hooting time for one minute, None of telephone number or recorded voice message. All make no difference with system password and RF codes.

12System reset order.

If you want to delete the first group , please input #1*# , the second, input #2*# . The rest may be deduced by analogy

11Delete telephone number

Accordingly input#9*90+ Four passwords +#,emit the signal by remote controller once, than this system will identify it and prompt a short and long sound B.

10RF record code operation(Note: it has been preset by supplier, please dont follow it to operate)

This GSM main unit can work with alarm receiving central monitoring system. It is requested to input the distributed ID codes to realize network management. Input #8*six ID codes # .

9Main unit network function and ID code preset

It can protect any operation error or illegal operation. It is also effective in the process of adjusting sensor, record and long-distance control. Here is input method #7*+Four passwords+#.Original default is 1234,if changed it for 6789,please just input #7*6789#.

8Password preset

Please on the keyboard accordingly input #9*4#,thereinto, stands fro the siren hooting minute. If preset #9*45#, the siren will hoot for five minutes once alarm. If you wan to keep the siren hooting, please input #9*4*#. This preset siren hooting time is subjected to none of  intervenor, nothing with dialing telephone number.

7Set up siren hooting time.

Please on the keyboard accordingly input #9*2#,you can hear one sound B to prompt this order.

6Shut off siren prompt sound by remote controller.

Please on the keyboard accordingly input #9*3#,than when you operate it by remote controller, siren can be heard while each operation.each operation by remote control to turn on siren that just enlarge the operating sound

5Enlarge operating prompt sound by turned on Siren sound by remote controller.

Please on the keyboard accordingly input #9*0#, one short and one long prompt sound can be heard. That means successfully completed. The siren wont be hooted once alarm.

4Mute alarm

Please on the keyboard accordingly input #9*1#,one short and one long prompt sound can be heard. That means successfully completed(after setup, the system will hoot once alarm)

3Phonic alarm system setup.

2Six group of alarm telephone number stored. Please accordingly on the keyboard input #*phone number # ,with one sound B from each confirmed step, thereinto, ? stands for which group. This system now is set for six group of phone number to dial out, therefore, is1-6,# * is necessarily prescribed format. Here, supposing the first group phone number is 075512345678,on the keyboard, you should accordingly input #1*075512345678#. Supposing it is the sixth group of phone number, on the keyboard, you should accordingly input #6*075512345678#. This system can be dialed extension number, e.g. the telephone exchange is 12345678, supposing the extension alarm phone number 8011, than you should input #1*12345678*8011#. When operation successfully completed, you can hear one short and one long prompt sound. If failure, than you will constantly hear B sound or input format incorrectly

1Set up recorded voice: Please on the keyboard accordingly input  #9* 80 + 4 passwords + # ,original password is 1234,After that please input #9* 801234 # ,now entering leaving word, meanwhile, the Armed LED turns on, please face the GSM main unit in a 20 cm distance to leave words. After that, please press any key-press, you can hear one short and one long sound B , that means leaving words is now successfully completed ( Note: Time for Leaving words is 10 seconds).

FUNCTION SETUP

GSM Alarm with excellent quality and reasonable price

try gsm alarm    to get through more products