CAN / LIN Communication Network System
Product Details
CAN-LIN Communication Network Training Kit
Part No:MP-CAN/LIN-Training
Our CAN/LIN Communication Network Training System primarily uses automobile electronics network such as the CAN bus and LIN bus to implement the data communication of vaious fuctional nodes.
The PC-end software performs the Baud Rate adjustment of CAN bus and LIN bus, data monitoring and module controls.
Our system consists of 3 parts:
Part I: Embedded Hardware(Comprised of the Main Control Board and Module Board)
(1) Main Control Board has built-in multi-voltage supply, and it also provides diverse interfaces such as the USB, ICSP, D-Sub 9-Pin RS232, CANbus, LINbus, Mini DIN 6-Pin(for GPS), SPI bus + I2C bus connector (both parallel-connected for Debugging), 128x64 graphic LCM with touch panel function, and two sets of module connector.
(2) Main Control Board contains two E2PROM (16K bit memory) chips, which are interfaced with SPI and I2C respectively. These interfaces are associated with the exterior connector to provide the convenience of data programming as well as debugging.
(3) This system provides 8 different functional and application modules:
(4) CAN Adaptor and Analysis Softwares for further applications (Optional)... [*More Info]
Part II: Embedded Software
(1) USB Interface Communication Program: Provides the sample code of application program for the communication between PC USB and Main Control Board.
(2) CAN Interface Communication Program: provides the sample code of application program for CAN communication between PC USB and Main Control Board.
(3) RS232 Interface Communication Program: Provides the sample code of application program for on board RS-232 communication.
(4) LIN Interface Communication Program: Provides the sample code of application program for LIN Master/Slave communication between PC USB and Main Control Board.
(5) Module Board Control Programs: Provides the Sample Code for module controls.... [*More Info]
[*More Info] For more information>> Please visit our website.
Part No:MP-CAN/LIN-Training
Our CAN/LIN Communication Network Training System primarily uses automobile electronics network such as the CAN bus and LIN bus to implement the data communication of vaious fuctional nodes.
The PC-end software performs the Baud Rate adjustment of CAN bus and LIN bus, data monitoring and module controls.
Our system consists of 3 parts:
Part I: Embedded Hardware(Comprised of the Main Control Board and Module Board)
(1) Main Control Board has built-in multi-voltage supply, and it also provides diverse interfaces such as the USB, ICSP, D-Sub 9-Pin RS232, CANbus, LINbus, Mini DIN 6-Pin(for GPS), SPI bus + I2C bus connector (both parallel-connected for Debugging), 128x64 graphic LCM with touch panel function, and two sets of module connector.
(2) Main Control Board contains two E2PROM (16K bit memory) chips, which are interfaced with SPI and I2C respectively. These interfaces are associated with the exterior connector to provide the convenience of data programming as well as debugging.
(3) This system provides 8 different functional and application modules:
7-Seg LED/Buzzer/Temperature Sensor Module
DC Motor Module (incl. 2 motors)
Stepping Motor Module (incl. 2 motors)
Voltage/Current Measurement Module (incl. 2 wire sets)...[*More info]
Stepping Motor Module (incl. 2 motors)
Voltage/Current Measurement Module (incl. 2 wire sets)...[*More info]
(4) CAN Adaptor and Analysis Softwares for further applications (Optional)... [*More Info]
Part II: Embedded Software
(1) USB Interface Communication Program: Provides the sample code of application program for the communication between PC USB and Main Control Board.
(2) CAN Interface Communication Program: provides the sample code of application program for CAN communication between PC USB and Main Control Board.
(3) RS232 Interface Communication Program: Provides the sample code of application program for on board RS-232 communication.
(4) LIN Interface Communication Program: Provides the sample code of application program for LIN Master/Slave communication between PC USB and Main Control Board.
(5) Module Board Control Programs: Provides the Sample Code for module controls.... [*More Info]
[*More Info] For more information>> Please visit our website.
This CAN/LIN Training System primarily uses automobile electronics network such as the CAN bus and LIN bus...
- Model Number:MP-CAN/LIN-Training
- Brand Name:Microport
- Place of Origin:Taiwan
- Country:Taiwan
- telephone:886-6-2753783
| Model Number: | MP-CAN/LIN-Training |
| Brand Name: | Microport |
| Place of Origin: | Taiwan |
