IP1000A Gigabit Ethernet NIC Single Chip

The IP1000A is a truly 10/100/1000Mbps Gigabit Ethernet NIC single chip which it incorporates a 32-bit PCI interface wit bus master support. It is manufactured using standard digital CMOS process and contain all the active circuitry required to implement the physical layer functions to transmit and receive data on standard CAT5 unshielded twisted pair cable.The IP1000A is designed for use in a variety of applications including workstation NICs, and other systems utilizing a PCI bus.The IP1000A includes a 32-bit PCI bus interface, IEEE 802.3 compliant MAC, transmit and receive FIFO buffers, IEEE 802.3 compliant 10BASE-T, and 100BASE-FX PHY, IEEE 802.3z compliant 1000 BASE-T PHY, serial EEPROM interface, expansion ROM interface and LED drivers.The IP1000A supports features for use in "Green PCs" or systems where control over system power consumption is desired. The IP1000A supports several power down states, and the ability to issue "wake event" via reception of unique, user defined Ethernet frames. In addition, the IP1000A can assert a wake event in response to changes in the Ethernet link status.Feature :PCI & DMA Features- PCI Specification Revision 2.3 compliant- 32-bit, 33/66MHz bus master capability- Efficient DMA operation maximizes PCI band-width utilization- 1 Terabyte (40 bit) address space- Scatter, gather transmit/receive DMA- Transmit "interrupt-less" mode of operation- Receive frame priority interrupts- Receive interrupt- Receive interrupt coalescingFIFO Features- No external memory required- Receive FIFO flow control thresholds- Configurable TX/RX FIFOMAC Features- 802.3z, 802.3x compliant- IEEE 802.1p, 802.1Q compliant- 1000Mbps, 100Mbps, 10Mbps triple speed, half/full duplex operationTransmit and receive back to back frames at full wire speed- Half duplex carrier extension and packet bursting- Asymmetric/symmetric flow control- VLAN tag insertion/removal- VLAN tagged frame filtering- IPV4, TCP, UDP checksum calculation/ verification- 802.3 MIB statistic register sets- 64-bit hash table for multicast frame filtering- Up to 4K Jumbo frame support for transmit and receive- Big-endianPhysical Layer Features- Fully integrated IEEE 802.3ab compliant 1000BASE-T, 100BASE-TX and 10BASE-T port- DSP receiver includes feed-forward equalizer, decision feedback equalizer, echo canceller, crosstalk canceller, and baseline wander correction- 802.3ab compliant Auto-Negotiation for automatic speed, duplex, and master/slave configuration- Automatic MDI/MDI-X crossover function and polarity correction- Automatic pair skew adjustment- PHY management registers- Smart Cable Analyzer (SCA)- Smart speed downshift- APS(Auto Power Saving)a. Power Saving with Link status detectingb. Keep only MAC alive through software settingPower Management, EEPROM and Package- WakeOnLAN support- ACPI Revision 1.0 compliant- 1.8/3.3V CMOS with 5V tolerant I/O- EEPROM (93C46/93C56 selectable) support- Optional boot from serial ROM support- 128-pin PQFP package