o Automatic AC-Power/UPS switch-over
o Equipped with Equalizer
o Equipped with Automatic Gain Control (AGC)
o Optional configurations e.g. 3+1 TX & 3+1 Rx
o Different powers to cover several distances
o Adjustable radio frequency using synthesizer technique
o 48 VDC Charger
o Redundant power supply block (1+1)
o System Modularity
o On board alarm
o Standby radio channel
o Operable in different circumstances
o Full duplex automatic switching
o Installable on 19 inch rack
o Order wire
o Possibility for transmitting 3 phone lines by each radio link (scalable up to 10 phone lines)
o Transmitting two pilot frequencies for better operation
o Fully complied with ITU-R recommendations G.xxx series
Capabilities & Advantages
"2+1 Tx" means transmission of two types of video+4audio signals on A to B path using two standard frequencies in 8 GHz band. TLM-80 is equipped with standby RF system including a transmitter and a receiver which transmits a separated radio frequency in 8GHz to be automatically substituted for faded radio frequency. In the case of 1+0 Rx, a signal video+4audio signal. In CB a multiplexed signal in 10 MHz bandwidth is created via a video signal and 4 independent audio signals. These signals will be splitted via a Splitter Block at the destination.
4. 3+1 Tx, 2+1 Rx
3. 2+1 Tx, 2+1 Rx
2. 2+1 Tx, 1+0 Rx
1. 2+1 Tx, 1+1 Rx
TLM-80 is a microwave link in GHz band which transmits 1 or 2 video+4audio signal(s) in full duplex mode. The link configuration is modular and can be organized as follows:
Description
A Microwave link for transmitting a video plus 4 audio signals over 8ghz band.
A Microwave link for transmitting a video plus 4 audio signals over 8ghz band. |