Bluetooth Module Blue-Nc4

Features

• Bluetooth radio module (Class 2)
• Bluetooth 2.0 specification
• Digital AUDIO interface (PCM interface)
• Integrated profiles: SPP, GAP, SDAP
• Supported profiles: DUN, FAX, FTP, HSP, HFP, OPP, SYNC, BIP, BPP
• Small form factor
• Integrated chip antenna
• UART interface with programmable baud rate
• Quick-Start Evaluation Kit available
• EN 300 328 compliant
  

Description

TheBlue-NC4 module is a completely integrated Bluetooth solution,containing Bluetooth radio (LMX9830), antenna and a fully implementedsoftware protocol stack. The module provides reliable Bluetooth datacommunication links as well as AUDIO communication links. Thus themodule supports AUDIO gateway applications (e.g. Headset or Handsfree).The module features point-to-point and point-to-multipoint linkmanagement supporting data rates up to 704 kbps. The internal memorysupports up to seven active Bluetooth ACL links (data) and one SCO link(AUDIO). Blue-NC4 is supplied with an onboard chip antenna.

TheBlue-NC4 module enables OEMs and designers to easily add wirelessBluetooth communication to their products without the need for RF andantenna design expertise.

Firmware
The firmware supplied within this module offers a complete Bluetooth (v2.0) stack including the following profiles:
SPP (Serial Port Profile)
GAP (Generic Access Profile)
SDAP (Service Discovery Access Profile)

In combination with a host, Blue-NC4 additionally supports amongst others the following profiles:
DUN (Dial up Networking Profile)
FAX (Facsimile Profile)
FTP (File Transfer Profile)
HSP (Headset Profile)
HFP (Handsfree Profile)
OPP (Object Push Profile)
SYNC (Synchronisation Profile)
BIP (Basic Imaging Profile)
BPP (Basic Printing Profile)

Dependingon the respective application, Blue-NC4 can either be linked to aprocessor via serial UART-interface or directly to a terminal device.Configuration of the module is being effected through a host processor.Depending on the application and pre-parameterisation, Blue-NC4 caneither be operated as master module or as stand-alone slave module.The module supports automatic slave operation eliminating the needfor an external control unit.