Wireless 802.11n Access Point/Router

Based on IP/DSCP/Port/Protocol with WRR

QoS

DNS Relay, Dynamic DNS

DNS

DHCP Client, DHCP Relay Agent, DHCP Server

DHCP

Open Source SDK with configuration interface and integration

UpnP

Mesh(Olsr ), Ad Hoc, WDS

Routing

IPv4 and IPv6, RIP v1/v2, TCP/IP, UDP, PPTP, PPPOE, DMZ, VLAN, Bridging, NAT/PAT, IGMP,  VPN , Firewall, ACL, IDS

Protocols

TR-069 based remote configuration & management

Web browser based, TFTP: FTP & Telnet, System configuration restore in FLASH memory (Firmware update)

System Configuration & Management

MAC address filtering

PSK, WEP, WPA2, authentication with Radius

Wireless Security

Ralink & Atheros Support

Wireless Modules

802.11 n compatible

Wireless Wi-Fi

Linux 2.6.25 or later with redundant boot process from FLASH

O/S, BSP

Comment

Feature

Software Features

6-Layer mini-ITX form factor PCB

3 x 3 MIMO solution

Power over Ethernet (IEEE 802.3af complian)

6.      USB 2.0 Type A connector

5.        2 x 10/100/1000 Base-T

4.      RS232

3.        1 x PCI-Express

2.        2 x MiniPCI-Express

1.        2 x MiniPCI

Interfaces

2.      32MB to 64MB NOR FLASH

1.        256MB to 512MB DDR2 SDRAM

Memory subsystem:                                                         

2.      400MHz DDR2 interface;

1.        667MHz Core Frequency

MPC8377E PQII Pro CPU

Hardware Features

The  Raynet wireless access point/router supports either single or dual-radio 802.11 n devices. The product can be used for wireless access, VPN router for secure remote access, intrusion detection or remote access point.

try access point    to get through more products