PoE Injector Series

Extends Ethernet cable installations for another 100 meters.
Forwards Power Over Ethernet (POE) to remote devices.
No power cable installation required.
Fully Ethernet protocol transparent no restrictions to network traffic.
100Mbps Ethernet Wire Speed.
Compatible with IEEE 802.3af POE standard.
IP65 Rain-Proof for BZP100-RP outdoor unit.
Simple to install Plug & Play.

In the simplest application, a BZP100-RP allows an IP camera to be located 200-300 meters away from a POE switch. The switch delivers POE power over the first 100 meters of Cat5 cable to the BZP100-RP, and the BZP100-RP restores the Ethernet signal and forwards remaining POE power to the camera. The BZP100-RP requires no local power supply, and the BZP100-RP presents no restriction to the camera network connection. Typically, the POE switch would be confined to a centrally located equipment room, and would connect to several IP cameras distributed about the site. With BZP100-RP, each camera may have its own dedicated connection to the switch, and power cable installation to remote switches or cameras is not required.

BZP100-RP is an Outdoor Unit for Power-over-Ethernet Repeater providing a 10/100Mbps Ethernet connection for 100m distance and extend Ethernet connectivity another 100m with power over Ethernet capability. It forwards both Ethernet and PoE for another 330ft (100m) using an innovative power-processing scheme and multiple units can be deployed in series for even longer distances, with no degradation in network speed or latency. BZP100-RP itself is powered by an Ethernet PoE switch (or PoE injector) and so requires no separate power connection in the middle of the cable, making it extremely easy to connect and power IP cameras two or three times further than previously possible without going to fiber or installing mid-span power sources.

BZP100-RP 1-port PoE Injector