RF Remote Control Subsystem CS-04R2T

4. Contents Of Products
Upon unpacking you will find the following items:
1. Main Unit
2. Transmitter X 2 (depending on order)
    (TX-3312R, TX-3313R, TX-3315, TX-3315S.etc)
3. Receiving Antenna
4. Fuse (2A or smaller)

3. Independant programmed mode:
  A. Pulse mode: The activated relay will be closed for 2 seconds for each activation.
  B. Sustaining (momentary) mode: The activated relay will be closed for as long as the transmitter button is held down.
  C. Latch (toggle) mode: Push the transmitters button to turn the lamp or the appliance on.
  D. A second press of the button will turn the device off.

2. Power requirements:
  CS-04R2T-DC: Using 12V DC.
  CS-04R2T-AC: Using 24V AC.

CS-04R2T-255 : 255 users

CS-04R2T-63 : 63 users

CS-04R2T-15 : 15 users

e.g.

This is an RF remote control subsystem with 2-button transmitter and 2 relays built inside the system with rolling code. Its the active low type. Major application is for the garage opener remote control. You can also use it as a general-purpose remote control system to control many applications around your home or for other hobby projects. You can add up to 255 transmitters per system.

1. Introduction

This is an RF remote control subsystem with 2-button transmitters and a receiver with 2 relays.