receiver module KST-RX702

6.      Buzzer buzzes one time after receiving valid remote signal, and gives coding to signal, then outputs high  voltage (+5v) signal at the counterpart output window.  

5.      The receiver module can recognize maximum 300 remote controls. As it recgnizes up to 19 remote controls at the same time, the other remote controls are only to be recognized on the conditon that all the recgnized remote controls must be removed, otherwise, please repeate the operation of 1&2.

4.     Press the LEARN button (1S), then the buzz indicates that the remote controls have been in learning state. If press the button all the time, all the remote controls which are in the state of learning will be cleared away after three sounds of buzz in six seconds.

3.     Receiving no signals within ten seconds after entering, the buzzer buzzes five times and exit automatically.

2.     Press any button one time, buzzing one time indicates the signals have been received. then press again, the second buzz indicate the remote control learns the signal and exit automatically.

1.     Press the LEARN button, a sound of buzz indicates remote control have been in the learning State.

Operation:

the discrimination between lock with decoder L4 & unlocked M4

(5)            receive sensibility: -102dB

(4)            modulation: AM

(3)            operating frequency: 315MHz- 433.92MHz

(2)            operating current:

receiver module KST-RX702
decoder L4 & unlock M4