pdh Modem


ORDER INFORMATION
BD-OP-E1/AC220V         E1 fiber modem,sigle fiber 20km,power AC 220V
BD-OP-E1/DC-48V          E1 fiber optic modem,sigle fiber 20km,power DC 48V
BD-OP-FE1/AC220V       Framed E1 fiber optic modem,sigle fiber 20km,power AC 220V
BD-OP-FE1/DC-48V        Framed E1 fiber optic modem,sigle fiber 20km,power DC 48V

Model name: BD-OP-E1
Product function: E1 fiber modem is to modulate framing (N*64Kbps) to single or multi-mode fiber. E1 time-slot, wavelength of ordinary fiber, and type of interface is configurable. Suit for transmit additional management data channel in different fibers.The fiber for transmit data can be used to monitor and control local and remote devices, and no collision will occur. It can also be used pair with V.35 fiber modem.

ENVIRONMENT REQUIREMENT:
Environment
The device operate temperature range wide, can work normally and stable in different environments.
Operate temperature: 0C~50C
Relative humidity: 95% (no condensation)
No causticity and impregnant gas, no rising dust, and no strong magnetic field disturbing.
Power supply
Use module power supply as following for option, working voltage range wide, good anti-disturb and isolation, work stable.
DC-48V: voltage range -36V~-72V
AC220V: voltage range 175V~265V
power consumption <5w
E1 interface match G.703
a. Rate: N*64Kbps(N=1~32)
b. Code: HDB3
c. E1 Impedance: 75ohm (unbalance) and 120ohm(balance).
Unbalance match with coaxial adapter, can match 75-2 coaxial wire. Balance match with balance adapter, can connect with twisted-pair wire.
d. Interface character: match G.703.
e. Connector: BNC(75ohm), RJ45(120ohm).
f. Jitter tolerance: fine than G.742 and G.823.
g. Clock: synchronize input E1 signal.
Fiber connector  
Optical interface:                   SC/FC
Optical Wavelenth:  FP1310 nm /DFB1550nm+/-50/40nm
Sending consumption:               -9dBm/-5dBm
Receiving and dispatching module:     >-6dBm
Optical receiver receiving sensitivity:   <-36 (BER<10 -10):
Dynamic range receiving:             >-30dB
Optical code:                       NRZ
Single mode : 9/125 um 
Transmitting range: SM 20Km, SM 40Km, SM 60 Km, SM 120Km
 DIMENSION
210mm (W) * 140mm (L) * 30mm (h)

pdh

pdh
E1 fiber modems,G.703 E1 to fiber converter,
framed or unframed E1
support BNC(75ohm) and RJ45(120ohm

  • fiber modem:fiber modems
  • Model Number:BD-OP-E1
  • Brand Name:BAUDCOM
  • Place of Origin:Shanghai China (Mainland)
  • Country:China (Mainland)
  • telephone:86-21-37709251
Delivery Time: 3~7days after order
Supply Ability: 1000 Unit/Units per Week
Minimum Order Quantity: 2 Set/Sets
Payment Terms: T/T,Western Union
Port: shanghai
FOB Price: US $30 - 150
fiber modem: fiber modems
Model Number: BD-OP-E1
Brand Name: BAUDCOM
Place of Origin: Shanghai China (Mainland)
*Your name:
*Your Email:
*To:Shanghai Baudcom Information Technology Co., Ltd.
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters Remaining: 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

We do inquire for you , please wait ...

Modbus RTU M2M Modem Network Fault Alarm Monitoring RTU

The Network Fault Monitoring RTU5028E is an innovation product,it is special designed for remote monitoring Ethernet Devices communication status and power supply status.it can detect the Ethernet device fault caused by power supply or network communication. If network ...

Come From BLIIOT

HIGH SPEED SATELLITE MODEM

Cowave SATCOM Modem can be used to modulate and demodulate SATCOM signals. Its modulation and coding methods can meet international common standards and the algorithm is implemented independently. It provides a standard L-band interface as well as the feeding clock/voltage for ...

Come From Cowave Communication Technology Co., Ltd.

Industrial 4G Modbus Modem I/O Module Controller Rtu for Water Pump control S475

S475 is industrial 4G RTU that supports 4G and ethernet communication, SMS and MQTT protocol. It is compatible with Huawei cloud, Alibaba cloud and other clould platform including customized cloud platform. It has two RS485, eight DI, four Relay output, six AI and one ...

Come From BLIIOT