Dream Box 7020

The DreamBox 7020-Si has an updated tuner producing amazing pictures! The DM7020 is the highest end, complete FTA receiver on the market. This is truly the future of satellite viewing. The DM7020-S is a digital satellite receiver with full Ethernet communication capabilities.Power PC driven with Linux operating system for endless possibilities.Powerful receiver for digital TV and Radio programs. - 250 MHz PowerPC Processor(350 Mips)- Linux open source (most parts under the terms of GPL)- Supports Linux Standard API (Direct-FB, Linux-FB, LIRC)- 1 x DVB Common-Interface Slot- 2 x Smartcard-Reader- Integrated Compact Flash Interface Slot- MPEG2 Hardware decoding (fully DVB compliant)- Common NIM DVB-S- 10/100 MBit compatible Ethernet Interface- modem- USB Port- 12V switch cinch- V.24/RS232 Interface- Big-size LC-Display- 32 MByte Flash- 96 MByte RAM- integrated IDE UDMA66 Interface- Support for internal HDD in any capacity- unlimited channel lists for TV/Radio- channel-change time < 1 second- full automatic service scan- supports directly bouquet-lists- supports EPG (electronic program guide)'- supports own videotext- supports multiple LNB-Switching control (supports DiSEqC)- fully adaptable OSD in many languages and skin-support- S/PDIF Interface for digital bit stream out (AC-3)- 2 x Scart-interfaces- RF modulator- Audio/Video cinch out- MINI-DIN connector for extern IR (send)DreamBox DM7020 technical dataDBS-Tuner:Frequency Range 950 . 2150 MHzSignal Level - 65 dBm . - 25 dBmSignal-to-Noise Level 12 dB max.DBS-Tuner Input Connector F-Type femaleInput Impedance 75 OhmAFC +/- 3 MHzDemodulation Shaped QPSKFEC Viterbi and Reed-SolomonViterbirate 1/2, 2/3, 3/4, 5/6, 7/8Roll-off Factor 35 %Demultiplexing according ISO 13818-1Common-Interface:Common-Interface Power Consumption max. 0,3A/5VVideo decoder:Video Compression MPEG-2 and MPEG-1 compatibleVideo Standard PAL G/ 25 HzVideo Formats 4:3 / 16:9Letterbox for 4:3 TV-DeviceAudio decoder:Audiokompression MPEG-1 ∓ MPEG-2 Layer I and IIAudio Mode Dual (main/sub), StereoFrequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHzOutput analog:Output Level L/R 0,5 Vss on 600 OhmTHD > 60 dB (1 kHz)Crosstalk < -65 dBOutput digital:Output Level 0,5 Vss on 75 OhmSampled Data Filtering 32 kHz, 44.1 kHz, 48 kHzS/PDIF-Output optical (AC3)Video parameter:Input Level FBAS 1 Vss +/- 0.3 dB on 75 OhmTeletext filter in conformity with ETS 300 472 Standard>TV-Scart:Output: FBAS, RGB, S-Video over OSD selectableVCR-Scart:FBASSerielle Interface RS 232:Typ RS232 bidirectionalBitrate 115,2 kBit/s max.Plug Connector SUB-D-9Function: Update of FirmwareEthernet:10/100 MBit compatible interfaceFunction Update of FirmwareUSB:USB 1.2 connectorMini DIN:I2C for steering of external devicesIR funktion Pins: 1 5V 2 SDA (I2C-Kanal 2) 3 SCL 4 3,3V 7 GND 8 IR-Output 9 GNDUDMA66 IDE Interface:Intern for connect HDDCompact Flash - ReaderLNB power and polarisation:LNB Current 500mA max. ; short-circuit-protectedLNB Voltage vertical < 14V no load, > 11,5V at 400mALNB Voltage horizontal < 20V no load, > 17,3V at 400mALNB shut-off at Standby-ModeCount of active satellite position:DiSEqC 1.0/1.2 SAT POSITION / SAT OPTIONDiSEqC - Rotor ControlPower consumption:< 20W (in operation, horizontal polarization / 400mA LNB current)< 11W (in operation, no LNB)< 4W (Deep-Standby-Mode)Input voltage:230V / 50 Hz alternating current +/- 15%Physical specification:Ambient Temperature +15