STB with IRDETO card reader

STB IRDETO.
- IRDETO card reader
- Satellite receiver
- Reale picture in picture function (PIP)
- Time shift function around 30 Seconds
- Fastest scan & search time
- Component output for best picture quality

Hardware Specifications:
- Input Connector: F-Type,IEC 169-24,Female
- Frequency Range: 950MHz to 2150MHz
- Input Impedance: 750Ohm... Unbalanced
- Signal Level: -25 to -65dBm
- LNB power & Polarization: Vertical -13V Horizontal -+18V
- Current: 500mA Max overload protection
- Amplitude: 0,6V - 0,2V
- DiSEqC Control: Version 1.0/1.2/Usals compatible
- Demodulation: QPSK
- Input Symbol Rate: 1 - 45 Ms/s
- FEC Decoder: Convolution Code Rate 1/2,2/3,3/4,5/6 and 7/8 with constraint Lenght K=7

Transport Stream Specification:
- Profile Level: MPEG-2 MP@ML
- Input Rate: 100 Mbit/s Max
- Aspect Ratio: 4:3 , 16/9
- Video Resolution: 720 x 576 (Pal) / 720 x 480 (NTSC)
- Audio Decoding: MPEG / MusiCam Layer I & II
- Audio Mode : Single channel / Dual channel joint stereo
- Sampling: 32,44.1 and 48KHz

System Resource:
- Main Processor: NEC UPD61217 (32bit@284MIPS)
- Flash Memory: 2 Mbyte
- Program DRAM: 32 Mbyte

Power Supply:
- Input Voltage: 100-250V - 50/60Hz
- Type: SMPS
- Power consumption: Max. 25W
- Standby Power: 8W
- Protection: Separate internal fuse

Physical Specification:
- Size (WxDxH) 280 x 210 x 50mm
- Weight: approx.2kg
- AV & Data IN/OUT
- TV Scart: Output (CVBS, RGB, Audio L&R)
- VCR Scart: In/Output (CVBS, Audio L&R)
- Video Out: 1xRCA Cinch
- Audio Out: 2xRCA Cinch
- RS232C: Transfer rate 115,200 bps/9 pin D-sup Type
- Component Out (YPbPr) : 3xRCA Cinch
- USB (Host) : A Type Female

RF Modulator:
- Connector: 75 Ohm IEC 169-2, Male/Female
- Frequency: 470MHz to 860MHz
- Output Channel: Ch21 - 69 for the Demulator
- TV Standard: PAL G/I/K, NTSC M selectable by Menu Setting
- Pre-Set Channel 38