Hiyunton H320 two way radio

*CTCSSCDCSSDTMF2-TONE

High/Low Power Switchable
High/Low power is switchable via the programmed key at a per channel basis, tailored for user environment.
Low output power preserves battery life when communication within limited range coverage; while high output power optimizes range coverage when further distance required.
Programmable 12.5kHz / 25kHz Channel Spacing
The feature enables flexibility and easy migration of channel spacing requirements when the need arises, with no need to buy new radios.
DTMF ANI Encode
DTMF ANI can be set on or off at a per channel basis.
2-Tone Encode and Decode
The 2-Tone encode and decode functions are assignable at a per channel basis. An incoming message is signaled with audio and visual alert.
Monitor
Allows continuous channel monitoring. The feature is especially helpful for adjusting volume or receiving a weak signal.
Battery Save
The Battery Save feature is automatically activated once no activity on the channel and no operation performed, for extended operation time.
Low Battery Alert
For extra convenience, the top-mounted LED flashes red to alert users to recharge the battery should the battery level run low.
Busy Channel Lockout
The feature further improves channel management by preventing transmission if another talk group is already on the air.
Time-out Timer
The feature allows for more efficient use of channels by limiting the amount of time of each transmission.
Wired Clone
Cloning enables duplication of radios in the field via a simple interface cable, without the use of a PC or special equipment.
PC Programming
Allows you to customize each radio to fit your needs.
Squelch Tail Elimination
The function will minimize the annoying audio outputs that occur at the receiver on completion of a transmission.
Selectable Squelch Level (0-9)
The purpose of squelch is to mute audio output from the speaker when no signals are present. The higher the squelch level selected, the stronger the signals must be to receive. The appropriate squelch level depends on ambient RF noise conditions.
Priority Channel Scan
Priority scan permits scanning of all channels while simultaneously monitoring a priority channel, allowing for activity even while receiving a call on another non-priority channel.

High transmit power accommodates wide communication coverage up to 6Km in open area.
Audio quality is critical for effective co