Bluetooth Interphone,Bluetooth Intercom

100m Bluetooth Interphone,Bluetooth Intercom,Walkie Talkie

   It may need 4 seconds to revert to the status of talk after phone.

Note:

  Press the MFB button when you are listening the stereo music, the music will pause and enter into the status of talking. After the phone, music will play again.

If there is a call or dial, the voice will switch to phone automatically, when you are listening the stereo music or using the Bluetooth to talk. After the phone, Bluetooth earphone will revert to music or talk status automatically.

Switching to each mode automatically

  The set of VOL is in the bottom of the product. There are two small holes (voice +, voice -), you can use a tiny tool like pencil or toothpick to adjust the voice to fit the product. Press the voice + or voice many times can increase or decrease the voice. When you hear a sound DING-DONG, it means the voice is the highest or lowest. Advising adjust it before being installed.

.VOL function of Bluetooth helmet earphone

   If your cell phone supports music playing feature, you can enjoy the music in your cell phone. Make sure your headset has paired with your Bluetooth Mobile Phone e successfully, and than you can enjoy the music playing in cell Phone

Enjoy the Music in your cell phone

Refusing the call, switching the telephone voice and re-dialing the last code, it needs agreement of your cell phone to support Bluetooth hand free. Voice Dialing need your cell phone has the function to support it

Note:

Use a mobile to dial in a normal way.

Using the mobile to dial

When the earphone is connecting with cell phone, press the MFB button twice to start the function of cell phone voice dialing.

Voice Dialing

  When the earphone is connecting with cell phone, press the MFB button 2 seconds till you hear a sound. And you can redial the last code.

Re-dialing the last code

   Press MFB button 2 seconds, after you heard a sound. It was switched to the mode of phone. Press MFB button 2 seconds, after you heard a sound again. It was switched to the mode of helmet earphone.

Switching the telephone voice

  Press the MFB button can stop the call, and can make your cell phone in a regular service.

Stopping a call

Once the earphone is ring, press the MFB button , till you hear a sound (above 2 seconds).

Refusing a call

   The unit has the function to answer a call automatically. After the second calling bell (above 8 seconds) without any operations, the unit will answer automatically.

Answering a call automatically

If one call is coming, press the MFB button to answer.

Answering a call

Using the phone function in Bluetooth helmet

If either party of the Bluetooth intercom helmet earphone want end of call, just short press the MFB button.

Finish the Bluetooth intercom call

After the two Bluetooth intercom helmet earphones have been successful matched, short press the MFB buttons on two Bluetooth intercom helmet earphones, the intercom call can be made.

Start up Bluetooth for intercom

Using the intercom function in the Bluetooth helmet earphone

5. After having entered the password, if the pairing has been successful, the LED of the device will turn to flash on time per 3 seconds. The earphone is now ready for use.

    4. When the phone asks for a password, insert 0000(4 zeros) and press OK.

    3. When the phone display shows the Bluetooth device detected, select MOTO H8 and confirm.

    2. While the device is waiting, go into the menu of the phone you want to pair, enable the phone's Bluetooth function and begin a search for devices.

1. When the device is off (no light is on) press and hold down the button for around 7 seconds. On the second, release the button and the LED will remain a constant blue. The device is now ready to be paired with a mobile phone.

Pairing to your Bluetooth Mobile Phone 

The Bluetooth earphone just can pair up with the Bluetooth earphone produced by BOAO Co. Ltd.

Note:

(6). The LED flash blue on two units, it means pairing succeed, two units have record automatically at the same time, no need to pair up again to talk later, just press MFB button on one unit after power on.

(5). The unit you pressed will research and connect to another unit.

(4). Short press the MFB button on one unit when the two unit LED flash red and blue discontinuously.

(3). Press and hold the MFB buttons more than 6 seconds at the same time on two units till hear two beep sound then loose it, the LED flash red and blue discontinuously now .

(2). Make sure two units are power off.

(1). Put the 2 units on the same place, the distance of them should less than 1meter. And make sure there is no any other Bluetooth equipment which is open in 10meters.

Pairing to another Bluetooth helmet earphone

To Power Off: Press the button 3 for around 3 seconds, and the LED will turn dark.

LED will flash blue per 3 seconds.

To Power On: Press and Hold the MFB for approximately 5 second until the

Powering On and Off  

Note: A normal charge from a low battery will take about 4 hours.

2. Connect the charger to a wall outlet. The blue indicator light is flashing during charging.

1. Connect the charger cable to the headset.

NOTEThe earphone has an internally installed rechargeable battery. Please ensure that the battery is fully recharged when you first time use it.

Charging the Headset 

How to Function

Weight: 35g excluding accessories

Dimensions (mm):87x 43x 23

*Wall Charger

*High Power ultra slim speaker with integrated microphone boom

Accessories:

Rechargeable Lithium Polymer 160mAh

Battery type:

Charging Time: 4 hours

Standby Time: Up to 500 hours

Talk Time: Up to 8 hours

Frequency: 2.4GHz

Up to 33ft (10m) for cell phones

Operating Range:

Bluetooth Headset and Hands free Profiles with Automatic Detection

Supported Bluetooth Profiles:

Bluetooth Version (1.0, 1.2, 2.0) Specifications

Bluetooth Compliance:

100m Bluetooth Interphone,Bluetooth Intercom,Walkie Talkie
1.Pairing to another Bluetooth helmet earphone
2.Bluetooth Complian

try bluetooth interphone    to get through more products