Mrrn Kite

Product Description
the MRRN kite is fun, exciting, challenging and educational. Mastering the MARRN Kite will take practice, patience and the proper wind conditions
1)In sert the two parts of the landing gear into the slots, add pontoon floats and end-protectors
2)Insert and snap rotor blades into the balancing arm slots, warning print should face up.
3) Attach the assembled rotors to the rotor head as illustrated
4) Tie string to the cip and snap it into one hole on the nose of the wind copter according to wind speed
5)Give the rotor a fast spin in the correct direction
6)Let your kite hang by its string at arm length, your back against the wind
7)As the rotor spins faster, step back against the wind, release string gently and watch it take off!
8) Adjusting rotor head: If after launching you notice that the wind copter leans on one side, adjust rotor head position and move it slightly to the same side to compensate.

- Packing 1 set/polybag, 50sets/CTN and carton size is 75*62*23cm, 21000sets/20'FCL

Recommended for ages: 14 and up, adult supervision is required for younger ages
Wind requirements: Steady wind, 20-70kml

Warning and disclaimer:
Do not attempt to stop spinning rotor with bare hands; Do not allow children to operate wind copter without strict adult supervision, stry clear of spinning rotor: Contact could cause injury, keep gutsy conditions, near power lines, antennas, light poles.

M. Omar
Mob. 0105444124