Hangar 9 1/4 Scale J-3 Piper Cub PNP Airplane HAN4575

Zenoah G20ei gas engine and servos installed
Full-bodied, posable pilot figure
Scale dash including Cub in tachometer
Scale Cub wheels and functioning landing gear
Operating door panels and removable interior seating for easy access to the plane's interior
Collapsable wing struts connected to wing and fuselage with an intelligent pin and cotter key system
Tubular construction for top outline more true to Cub scale lines
Scale fin to fuselage fillet
Covered in genuine Hangar 9 UltraCote

Specifications 
Wingspan: 106 in (269 cm)
Overall Length: 68 in (172.7 cm)
Wing Area: 1630 sq in (150.2 sq dm)
Flying Weight: 15.36 lb (6.97 kg)
Engine Size: Zenoah G20ei (ZENE20EI) 20cc electronic ignition gas engine (installed)
Radio: 4 to 6 channels
Servos: 6 JR Hi-Torque (JRPS821) digital servos (installed)
Trim Scheme Colors: Cub Yellow (HANU884) & Black (HANU874)
CG (center of gravity): 4 ? to 5 inches from the leading edge of the wing at fuselage
Wing Loading: 21.73 oz/sq ft
Prop Size: 16x6
Spinner Size: 8mm x 1.25
Recommended Battery: 2400mAh 4.8v ignition pack (JRPB4460) & 2400mAh 6v RX pack (JRPB4470), Both Included
Aileron: 5/8 inup; 1/2 indown
Elevator: 7/8 inup/down
Rudder: 1 ? inleft/right
Scale: 25%

Include :

Radio (4 or more channels)
7-Channel ScanSelect PCM Receiver (JRPR790)