HPI 1/5 Baja 5B RTR RC Buggy

    * Unleaded Gasoline: 87-93 Octane (mix gasoline and two cycle oil at 25:1 ratio) (NOT Included)
    * Radio: 8 AA Alkaline Batteries (NOT Included)
    * Screwdriver: Flat blade, 3/16 Inches (4-5mm) Wide (NOT Included)

Requirements:

    * Vehicle
          o Length: 32.2 Inches (817mm)
          o Front Width: 18.1 Inches (460mm)
          o Rear Width: 18.9 Inches (480mm)
          o Height: 10 Inches (255mm) with 1G, 11 Inches (280mm) with 0G
    * Ride Height: 3 Inches (76mm)
    * Suspension Travel: Front 3.7 Inches (95mm), Rear 3.9 Inches (100mm)
    * Weight: 21.3 lbs (9.6kg)(approx.)
    * Wheelbase: 22.4 Inches (570mm) wheels on-center front-to-rear
    * Front Tread: 15.0 Inches (382mm)
    * Rear Tread: 15.8 Inches (402mm) wheels on-center side-to-side
    * Front Track: 17.4 Inches (442mm)
    * Rear Track: 18.1 Inches (460mm) outer edges of wheels
    * Gear Ratio: 8.382:1
    * Tires
          o Front: 2.4 Inches (60mm) x 6.7 Inches (170mm)
          o Rear: 3.1 Inches (80mm) x 6.7 Inches (170mm)
    * Body
          o Length: 22.9 Inches (581mm)
          o Width: 8.8 Inches (224mm) at rear wheels (widest point) 3.25 Inches (82mm) ahead offront wheels (thinnest point)
          o Height: 4.75 Inches (121mm) at highest point

Specifications:

    * HPI Baja 5T RTR Truck with 1.6 cu in (26cc) Gasoline Engine
    * 27MHz FM Radio
    * Two Water Resistant Servos
    * 3.4oz (100cc) 2-Cycle Oil
    * 2oz (60cc) Shock Oil
    * 1oz (30cc) Diff Oil
    * 1oz (30cc) Air Filter Oil
    * Tube of Gear Grease
    * 2000mAh Receiver Pack
    * Wall Charger
    * Body with Wing
    * Extra Air Filter
    * Wrenches
    * Decal Sheet
    * Iillustrated Instruction Manual

Includes:

    * HPI Racing 1/5 Baja 5B 2.0 Gas RTR 10629
    * Chassis: Narrow channel monocoque design 0.16" (4mm) thick, gunmetal anodized, constructed of aircraft grade 6061 T6 aluminum
    * Drive: Rear wheel gear drive
    * Engine: 2 cycle 1.40 cu in (23cc) gasoline with pull starter, updated cylinder that provides 10% more power than original version dual element foam air filter, primer, choke and kill switch. Now equipped with Torx T27 screws for less wear on tools and screws
    * Exhaust: Steel High Flow design with much larger capacity than original
    * Radio: HPI TF-10 3-channel FM 27MHz with steering and throttle trim steering dual rate, transmitter does not have charge jack, 3rd channel switch is for optional accessories, receiver has adjustable failsafe, 6V 2000mAh rechargeable receiver pack, AC chargerwater resistant housing on chassis with external charging jack and rubber cap for easy crystal changes
    * Servos: Water resistant with high torque 25kg-cm steering servo
    * Receiver Battery: 2000mAh, five sub C-cell 6V rechargeable pack
    * Clutch: Automatic centrifugal type, 8000 RPM for quick acceleration
    * Ball Bearings: Full set included
    * Shocks: Four VVC/HD oil-filled, aluminum body, five externally adjustable dampening settings and dual rate springs for progressive dampening action on all surfaces
    * Main Gear: 57 tooth
    * Gearbox: Sealed
    * Differentials: Viscous Torque Control can be tuned using different weight diff oils, hardened metal planetary gears
    * Brakes: Ventilated dual disc
    * Front Tires: HPI Dirt Buster Rib Pattern M compound 2.4" (60mm) wide 6.7" (170mm) outer diameter
    * Rear Tires: HPI Dirt Buster Block Pattern S compound 3.1" (80mm) wide, 6.7" (170mm) outer diameter
    * Wheels: 5-spoke, nylon 3-piece bead lock, bead is bolted to wheel to hold tire securely in place-no need for tire glue
    * Body: 0.08" (2mm) thick polycarbonate pre-painted in either gray, red or blue (see COMMENTS below) with decals applied
    * Rear Wing: Molded black plastic with decals applied
    * Roll Cage: Baja style high impact nylon protects engine and body from crash damage
    * Suspension: Fully adjustable, long travel double wishbone
    * Caster: Adjustable, with shim 22 / 25.5* stock / 29 degrees caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
    * Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
    * Warranty: 2-year limited

Features:

The Baja 5B 2.0 gives you more speed, better acceleration, improved handling and THREE fantastic new looks! The awesome gray-anodized look of the Baja 5T truck comes to the buggy, with all of the main aluminum parts now anodized a cool, sleek gunmetal colour. The body is now available in three fantastic new designs: bright red, cool blue and subdued gray.

The HPI Baja: the original, and still the best!

After all that, you'll understand that when it comes to updating such a legendary car, you can't mess with the magic too much: we wanted to give our fans more of the same, without going overboard. It was a tricky subject, but we're sure we got it right on the money.

Product Description
When the designers at HPI released the original Baja buggy to the public, we didn't realize the absolute storm of popularity it would enjoy. Racers everywhere loved it, reviews from all over the world absolutly glowed with enthusiasm, shops ran out of stock and brand new companies sprung up to make wild hop-ups for this one-of-a-kind machine. We had just as much fun tracking all the praise as we did for the Savage monster truck! Most encouraging of all, though, we heard back from customers everywhere about how much they enjoy their Baja, which is the best thing we could possibly expect.

The HPI Baja: the original, and still the best!