E-Flite Mini Pulse XT PNP Electric RC Airplane
Based on the popular Hangar 9 Pulse XT 40, the E-flite Mini Pulse XT PNP is perfect for anyone moving up from a trainer or intermediate to expert pilots looking for a no-fuss parkflyer. Its
friendly flight characteristics wont overwhelm the newer pilot, but its still agile enough for a wide range of basic aerobatics. And it can be flying in no time because it comes out of the box with
the motor, ESC and servos installed. All that needs to be added is the transmitter, receiver, battery pack and charger of choice. Even the control linkages are installed.
Satisfy your flying fix with the E-flite Mini Pulse XT PNP. It has all the features which make for a convenient flight experience. An easy-access magnetic battery hatch stays firmly in
place yet makes swapping out batteries quick and easy. The steerable tail wheel is built into the rudder so takeoffs and rollouts on breezy days are more controllable. Two hex screws hold the wing
firmly in place making it easy to remove for transport. The bolt-on tail is secured with two heavy-duty lock nuts. The tough aluminum landing gear comes already painted along with a factory-painted
fiberglass cowl and wheel pants. This exclusive Plug-N-Play configuration lets you get airborne in less than an hour.
All that's needed to complete: Radio, battery, charger, and receiver.
Plug-N-Play? designjust add battery pack, transmitter, receiver and charger
Lightweight balsa/lightweight plywood construction
Covered in genuine Hangar 9? UltraCote?
A 450-size brushless motor at 890Kv that comes factory-installed to provide excellent sport power and save pilots time
22-Amp Brushless ESC installed
Four factory-installed 9-gram sub-micro servos
Factory-installed hinges and control horns
Factory-painted aluminum landing gear and fiberglass wheel pants
Steerable tail wheel
Bolt-on wing and tail
Easy-access magnetic battery hatch
Design based on Hangar 9s popular Pulse 40 XT
Wing Span: 42.5 in
Overall Length: 37.5 in
Wing Area: 330 sq in
Flying Weight: 25 - 27 oz
Motor Size: Installed 450 BL Outrunner, 890Kv (special PNP motor)
Radio: 4 channels or greater
Servos: 9 gram (4 installed)
Trim Scheme Colors: UltraCote White (#870), Deep Blue (#873), and Orange (#877)
CG (center of gravity): 2 3/4 in (70mm) behind the leading edge of the wing
Prop Size: 10x7 Slow Flyer (included) or 10x8 Electric recommended 9upgrade)
Spinner Size: 1 3/4 in (included)
Hardware Included: yes
Speed Control : 22A Brushless (installed)
Recommended Battery: 2100mAh 11.1V Li-Po
Control Throw (Ailerons): 3/8in (9mm) Low or 1/2in (13mm) High Up/Down
Control Throw (Elevator): 1/4in (6mm) Low or 1/2in (13mm) High Up/Down
Control Throw (Rudder): 1-1/4in (32mm) Low or 1-1/2in (38mm) High Left/Right
Scale: park flyer
Approx. Assembly Time: 1 - 2 hours
E-Flite Mini Pulse XT PNP Electric RC Airplane