Performance
* Genesis 130FI 4-stroke engine
The over-achieving Genesis 130FI engine is the heart of our lightweight, high performance and aggressive FX Nytro model family. It has dominated its class at the Old Forge Shoot-Out 2 years
straight, claiming top speed twice and posting the best average ET over 4 runs down the ?-mile track. The advanced fuel injection keeps the 3-cylinder engine running at maximum 130 horsepower-class
performance.
* Advanced fuel injection
The Genesis 130FI uses Yamahas advanced fuel injection system to control fuel flow to the engine. Consumers will enjoy the engines spot-on performance and throttle response as a result of
the advanced electronic fuel injection system.
* Engine Braking Reduction System
The Genesis 130FI features the unique Engine Braking Reduction System (EBRS). This technology keeps the clutch slightly engaged to give the sled a coast feeling when the throttle is
released.
* Lightweight rear-exiting exhaust
The patented rear exit design serves many performance-enhancing functions on the FX Nytro XTX. First, it cools the pipe by running it down the tunnel, where it can be snow-cooled. Second, it
reduces the amount of under-hood heat produced. Third, the rear-exiting design distributes weight for a finely balanced sled.
* Forced air radiator ducting
The FX Nytro XTXs airflow design pulls fresh air in from around the headlight and forces it through the radiator fins for high cooling capacity, resulting in consistent engine performance
even in low-snow conditions.
* 15x144x1.25-inch Camoplast Rip Saw track
The FX Nytro XTX uses a 144-inch Camoplast Rip Saw track. The added length is what gives the sled its excellent off-trail, fresh snow flotation. The basic Rip Saw design has been widely
acclaimed in the industry as the best all-around OEM track for acceleration, cornering bite and everyday trail usage. The Rip Saw track development is the result of a collaborative effort between
Yamaha and Camoplast.
Handling
* FXG2 front suspension geometry
The FX Nytro XTX features the acclaimed FXG2 front suspension with more trail and relaxed caster for crisp steering response and confidence-inspiring, flat handling in the corners and
through the rough trail.
* FX chassis with sport rider-forward position
The compact design puts the engine down low and back in the chassis, leaving the top of the cab open for airflow. This gives the FX Nytro XTX a very centralized mass. The FX Nytro XTXs sport
rider-forward ergonomic design puts the rider in an aggressive, yet comfortable, forward posture.
* Over-the-engine steering
The snocross-proven over-the-engine steering configuration on the FX Nytro XTX gives the rider excellent posture on the sled. It also allows the engine to be tucked deep into the chassis for
optimum balance and mass centralization which contributes to the sleds overall handling characteristic.
* Tall, hooked bars
To match the tall and forward position, a single-piece, dual-hooked handlebar is standard fare on the FX Nytro XTX. The hooks have the same grip material as the main bar section, for
consistent control, regardless of hand position on the grip.
* Composite upper skeleton
The headlight assembly and upper portion of the FX Nytro XTX is supported by a super-lightweight composite framework. By using a rugged, high tech composite material as the structure for the
top portion of the sled, Yamaha engineers were able to keep the mass centered low and deep in the chassis.
* Lightweight tunnel
The FX Nytro XTX features a lightweight tunnel design. With the runningboards tipped up at an aggressive 11-degree angle, the XTX delivers big ground clearance for off trail capability. The
new design also features large snow evacuation and boot gripper punch outs. The lightweight tunnel was developed on the Pro Open snocross race sled.
Comfort
* Dual Shock CK 144 rear suspension
The Dual Shock CK 144 rear suspension is the culmination of many years of development and testing. In order to be the ultimate crossover snowmobile, the FX Nytro XTX needed to have cornering
like a 121-inch trail sled, bump bridging like a 136-inch sled and the flotation of a 144-inch sled. The solution is the aggressive 6-degree rear tip-up on the rails, which gives the sled the
footprint of a short track model on hardpack and the footprint of a long track model in fresh snow. The coupled design delivers excellent comfort and bump absorption over a wide variety of trail
conditions.
* 40mm compression-adjusting clicker shock
The Dual Shock CK 144 rear suspension is fitted with a 40mm HPG shock with a remote reservoir and compression clicker on the rear arm and an aluminum-body HPG shock on the front arm.
* GYTR dual-clicker front shocks
Lightweight premium GYTR dual-clicker shocks offer riders the highest level of tunability on the market with 12 clicks of compression AND 20 clicks of rebound damping. Large, glove-friendly
knobs make adjustments easy. The piggyback reservoir gives the shock increased fade resistance in periods of intense use.
* New wheels with removable bearings
The newly designed wheels make the ride smooth and make maintenance easy. Now when the bearings need to be replaced you dont have to purchase a whole new wheel, just remove the old bearings
and insert the new ones. The wheels also include a new spoke design and a rubber rim that make for a comfortable riding experience. This new design will be implemented on the rear large wheels as
well as the internal smaller wheels.
* Sculpted narrow seat
The FX Nytro XTX has a narrow seat for added comfort. In addition to putting the rider in a tall, forward, attack posture, the seats height makes it plush and comfortable for a full day of
riding. The narrow seat sits atop the beveled tunnel, which allows the track to be a traditional 15 inches wide, to maximize traction.
* New grip warmers
The FX Nytro XTX receives new, redesigned grip warmers for 2010. These new grip warmers deliver a more concentrated heat source rather than spreading the warmth out. The result is a much
warmer grip for your hands most comfortable riding position. In addition, an insulator has been inserted between the heating element and handlebar to retain heat longer and more efficiently.
* Digital gauge
The digital gauge displays key information at a glance. Vehicle speed is displayed on a large LCD readout either in miles or kilometers per hour. In addition, the rider can select
tachometer, odometer or tripmeter data to appear on the secondary readout. The gauge also displays system warning lights, fuel level, and warmer intensity.
* Quick-release, single-piece hood/console shroud
The FX Nytro XTX has a single-piece hood and console shroud. The design allows owners to open and close the top portion of the sled easily with Dzus quick-connect fasteners.
* New graphic packages
The FX Nytro XTX comes in two graphic packages; white/blue as well as Yamaha black. These awesome designs produce one of the best looking sleds on the snow.