2010 FX Nytro Snowmobile

Performance

* Genesis 130FI 4-stroke engine
  The over-achieving Genesis 130FI engine is the heart of our lightweight, high performance and aggressive FX Nytro model family. It has dominated its class at the Old Forge Shoot-Out 2 years straight, claiming top speed twice and posting the best average ET over 4 runs down the ?-mile track. The advanced fuel injection keeps the 3-cylinder engine running at maximum 130 horsepower-class performance.
* Advanced fuel injection
  The Genesis 130FI uses Yamahas advanced fuel injection system to control fuel flow to the engine. Consumers will enjoy the engines spot-on performance and throttle response as a result of the advanced electronic fuel injection system.
* Engine Braking Reduction System
  The Genesis 130FI features the unique Engine Braking Reduction System. The system allows a small amount of air to pass through the fuel injection system when the throttle is released, giving riders a coast feeling.
* Lightweight rear-exiting exhaust
  The patented rear exit design serves many performance-enhancing functions on the FX Nytro. First, it maximizes horsepower by using a straight exhaust pipe design. Second, it reduces the amount of under-hood heat produced. Third, the rear-exiting design distributes weight to contribute to the excellent balance of the sled.
* Forced air radiator ducting
  The FX Nytros airflow design pulls fresh air in from around the headlight and forces it through the radiator fins for high cooling capacity, resulting in consistent engine performance even in low-snow conditions.
* 15x121x1.25-inch Camoplast Rip Saw track
  The Camoplast Rip Saw track is a standard feature on the FX Nytro. It has been widely acclaimed in the industry as the best all-around OEM track for acceleration, cornering bite and everyday trail usage. The Rip Saw track development is the result of a collaborative effort between Yamaha and Camoplast.

 Handling

* FXG2 front suspension geometry
  The FX Nytro features the acclaimed FXG2 front suspension with more trail and relaxed caster for crisp steering response and confidence-inspiring, flat handling in the corners and through the rough trail.
* FX chassis with sport rider-forward position
  The compact design puts the engine down low and back in the chassis, leaving the top of the cab open for airflow. This gives the FX Nytro a very centralized mass. The FX Nytros sport rider-forward ergonomic design puts the rider in an aggressive, yet comfortable, forward posture.
* Over-the-engine steering
  The snocross-proven over-the-engine steering configuration gives the rider excellent posture on the sled. It also allows the engine to be tucked deep into the chassis for optimum balance and mass centralization.
* Tall, hooked bars
  To match the tall and forward position, a single-piece, dual-hooked handlebar is standard fare on the FX Nytro. The hooks have the same grip material as the main bar section, for consistent control, regardless of hand position on the grip.
* Composite upper skeleton
  The headlight assembly and upper portion of the FX Nytro is supported by a super-lightweight composite framework. By using a rugged, high tech composite material as the structure for the top portion of the sled, Yamaha engineers were able to keep the mass centered low and deep in the chassis.
* Lightweight tunnel
  The FX Nytro features a lightweight tunnel design. With the runningboards tipped up at an aggressive 11-degree angle, the FX Nytro delivers big ground clearance for rough trail capability. The new design also features large snow evacuation and boot gripper punch outs. The lightweight tunnel was developed on the Pro Open snocross race sled.

 Comfort

* Dual Shock CK rear suspension
  The race-proven Dual Shock CK rear suspension is the culmination of four years of development, testing, racing and redevelopment to produce the ultimate big bump rear suspension. The FX Nytros rear suspension is engineered to handle the deep pits and big moguls youll find in the ditches and trails. The rear shock uses a compression-adjusting clicker on its remote reservoir to allow owners to tune the setup to their liking. In addition to this, the FX Nytro receives a new rear-rear shock calibration providing more rider comfort while still maintaining its rough trail performance.
* 40mm compression-adjusting clicker shock
  The Dual Shock CK rear suspension is fitted with a 40mm HPG shock with a remote reservoir and compression clicker on the rear arm and an aluminum-body HPG shock on the front arm. The shocks 14mm rods are very rugged for rough trail usage. The clicker shock allows owners to dial in their rear suspension to their liking.
* GYTR dual-clicker front shocks
  Lightweight premium GYTR dual-clicker shocks offer riders the highest level of tunability on the market with 12 clicks of compression AND 20 clicks of rebound damping. Large, glove-friendly knobs make adjustments easy. The piggyback reservoir gives the shock increased fade resistance in periods of intense use.
* Wheels with removable bearings
  The newly designed wheels make the ride smooth and make maintenance easy. Now when the bearings need to be replaced you dont have to purchase a whole new wheel, just remove the old bearings and insert the new ones. The wheels also include a new spoke design and a rubber rim that make for a comfortable riding experience. This new design will be implemented on the rear large wheels as well as the internal smaller wheels.
* Sculpted narrow seat
  The FX Nytro has a narrow seat for added comfort. In addition to putting the rider in a tall, forward, attack posture, the seats height makes it plush and comfortable for a full day of riding. The narrow seat sits atop the beveled tunnel, which allows the track to be a traditional 15 inches wide, to maximize traction.
* New grip warmers
  The FX Nytro receives new, redesigned grip warmers for 2010. These new grip warmers deliver a more concentrated heat source rather than spreading the warmth out. The result is a much warmer grip for your hands most comfortable riding position. In addition, an insulator has been inserted between the heating element and handlebar to retain heat longer and more efficiently.
* Digital gauge
  The digital gauge displays key information at a glance. Vehicle speed is displayed on a large LCD readout either in miles or kilometers per hour. In addition, the rider can select tachometer, odometer or tripmeter data to appear on the secondary readout. The gauge also displays system warning lights, fuel level, and warmer intensity.
* Quick-release, single-piece hood/console shroud
  The FX Nytro has a single-piece hood and console shroud. The design allows owners to open and close the top portion of the sled easily with Dzus quick-connect fasteners.
* New graphic packages
  The FX Nytro comes in two graphic packages; white/blue as well as Yamaha black. These awesome designs produce one of the best looking sleds on the snow.

Sell 2010 FX Nytro !

  • Country:Indonesia
  • telephone:62-21-3860211
Sell 2010 FX Nytro !
*Your name:
*Your Email:
*To:ABA SARANA LESTARI.PT
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters Remaining: 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

We do inquire for you , please wait ...

JUKI Machine Feeder KE730\740\750\760 KE2010\2020\2030\2040\2050\2060\2070\2080 FX-1\FX-2\FX-3

For JUKI Machine:KE730740750760 KE20102020203020402050206020702080 FX-1FX-2FX-3 FEEDER MODLE JUKI MACHINE MODLE JUKI ATF CTF FTF 8*2 feeder 2001 2050 2060 750 JUKI ATF CTF FTF 8*4 feeder 2002 2050 2060 750 JUKI ATF CTF FTF 12mm feeder 2003 2050 2060 750 JUKI ATF CTF FTF 16mm ...

Come From Jinchen Electric Technology Co,.Ltd

JUKI KE730/740/750/760/2010/2020/2030/2050/2060/FX-1/2070/2080 Stick FEEDER

JUKI KE730/740/750/760/2010/2020/2030/2050/2060/FX-1/2070/2080 Stick FEEDER Detailed products discription supply JUKI Stick Feeder. JUKI KE730/740/750/760/2010/2020/2030/2050/2060/FX-1/2070/2080 Stick FEEDER Name: Juki stick Feeder Width: 100MM (three) / 80MM (three) Power: ...

Come From Jinchen Electronic Technology Co,.Ltd

SMT Juki KE2010-2060/FX-3 Filter E3052729000

We are specialized in SMT pick&place equipment and SMT spare parts of Juki,which includes feeder,nozzle,motor,sensor Thanks sale@jinchensmt.com ...

Come From Jinchen Electronic Technology Co,.Ltd