TELESCOPIC LIFTS MEDIA TRUCK

The HIDRO-GRUBERT BERT LIFT BT-29N Aerial Lift is NON INSULATED and is not intented for use on energized lines or apparatus.
All models of HIDRO-GRUBERT Aerial Lifts comply with ANSI A-92.2 1990 and OSHA 1926.556, 1910.67 regulations.
HIDRO-GRUBERT reserve the right to make changes to our products or specifications at anytime without notice or obligations.

OPTIONS

EMERGENCY OPERATION
12 V DC emergency power system.

BOOM ACTION
Lower boom articulation:  -10?  to  84?
Upper boom extension/retraction:  -2615 mm  to 103 in

MECHANICAL SYSTEM
Nivelation system: Hydraulic.
Rotation: is activated by hydraulically driven worm and spur gears with shear-ball rotation bearings.
Non-lube bearings are used at all points of movements.

SAFETY
Safety valves included in hydraulic cylinders stall the system in case of hose damage or any hydraulic system failure.
Hydraulic hoses and platform leveling system installed inside boom for protection.
Lifting / extension cylinders: Check and holding valves.
Outriggers cylinders: Check valves.
Hydraulic hoses and platform leveling system installed inside boom for protection.

BUCKET
Constructed in reinforced plastic with fiber glass.
Dimensions 610 x 610 x 1060mm     24" x 24" x 42"
(According ANSI A-92.2 - 1990)

CONTROLS
Full hydraulic controls at platform and pedestal equipped with "Dead Man" system.
Engine start / stop at platform and pedestal is standard.
Hydraulic tool power at platform.

  (*) Based on a 36 in (914 mm) chassis frame height.

CONTROLS
Full hydraulic controls at platform and pedestal equipped with "Dead Man" system.