HNBR O-Ring
Product Details
-
Special Compound
Excellent
R410a Resistance
Excellent
R134a Resistance
Good
Oil Resistance
Excellent
Water Resistance
Good
Tear Resistance
-30 ~ 200
Temp. Range
50 ~ 95
|
Hardness Range
HNBR O-Rings/ O Rings(sealing ring) are widely used in the air conditioner and auto air conditioner, have excellent characteristics of cold media resistance, such as HCFC-134a,
CFC-12, R404,R 407C,R 410A, Ammonia etc.
8. Packing on your order. 7. OEM/ODM or manufacturing on the drawing are offered. 6. SAE AS568, ISO3601, DIN 3771, JISB 2401 etc are all available. 5. Compliance for the ISO9001-2000, TSI16949 system. 4. The color could be chose. 3. Minimum thickness could be 0.35mm. 2. NBR, HNBR, PU, SI, EPDM, VITON, CR, PTFE etc are available. 1. Appling for auto, machineries, air-conditioner, furniture and home appliance.
O-RING is a kind of sealing products which is usually made of springing material and through the molding way to make it in the ring shape. It is generally used to seal the fluid liquid or gas, often works as a part of the whole set of sealing parts. O-ring is good at both in static seal and dynamic seal, main material contains: NBR,SR,VITON,SILICON PTFE,HNBR,PU etc. |
O-RING is a kind of sealing products which is usually made of springing material and through the molding way to make it in the r
- o ring:rubber o ring
- ruber o ring gasket:rubber o ring seals
- Place of Origin:Zhejiang China (Mainland)
- Country:China (Mainland)
- telephone:0086-0574-63412057
| Payment Terms: | L/C,MoneyGram |
| Port: | Ningbo |
| o ring: | rubber o ring |
| ruber o ring gasket: | rubber o ring seals |
| Place of Origin: | Zhejiang China (Mainland) |
Send inquiry / quota request to HNBR O-Ring
Relate products of HNBR O-Ring
The O-type sealing ring is a rubber sealing ring with a circular cross-section. Because its cross-section is O-shaped, it is called an O-type rubber sealing ring, also called an O-ring. It began to appear in the mid-19th century, when it was used as a sealing element for steam ...
Come From Pansto Pump Co., Ltd
The O-ring is an extrusion seal. The basic working principle of the extrusion seal is to rely on the elastic deformation of the seal to cause contact pressure on the sealing contact surface. If the contact pressure is greater than the internal pressure of the sealed medium, ...
Come From Pansto Pump Co., Ltd
The O-rings of horizontal slurry pumps can be divided into static seals, reciprocating seals, rotating seals and switch seals according to the relative movement state between the seal and the sealed device. According to the compression amount (tightness) of the O-ring ...
Come From Pansto Pump Co., Ltd
