Truck Tainer Body Base Frames

black

two (2) reinforced locking bars to match locking dimensions of TruckTainer chassis lift
Finish

heavy duty welded construction
3/8" steel arm braces with chained upper pin
safety chain bolted to body base frame
telescoping lower leg with eight (8) settings in 2' increments to compensate for uneven ground
orange reflective tape on leg fronts for added safety
Locking System

four (4) fully retractable leg assemblies
legs store under floor and between crossmembers when retracted
legs pull out horizontally and lower vertically when extended
Leg Specifications

Retractable Legs


Freestanding Payload Capacity  Side Rails 
24,000 pounds
 1/8" steel perimeter rails
optional 1/4" side rails for flat bed and curtainside body types
 
Construction Guide Rails 
all welded and reinforced
manufactured to body builder's exact length and width requirements
 two (2) full-length tapered steel guide rails, rigidly welded to crossmembers
two (2) full-length 1/4" long rail reinforcement bars
 
Electrical Leg Housing 
four-way light plug receptacle to match plug on chassis
 four (4) leg box assemblies welded to side rails, crossmembers and guide rails
 
Crossmembers  
4 3/8" deep on 12" centers
  

TruckTainer Body Base Frames Specifications

The Retractable Legs can even compensate for uneven ground. The lower portion of the Retractable Leg telescopes in 2" increments to help keep the body standing level, While in transit, the Retractable Legs are stored out of sight between body crossmembers - away from any possible road hazards.

At the core of TruckTainer Body Base Frames are four rugged retractable legs that support the freestanding units. These near maintenance-free legs are designed for durability, longevity, and easy-of-use. Proven for over 30 years, TruckTainer Retractable Legs are fully braced and can withstand a 24,000 pound payload.

  
  View the
step-by-step process
  
  
  
Fully Retractable Legs

Included in the Body Base Frame sub-assembly are two full length tapered guide rails that are designed to provide simple and safe alignment of the body to the Chassis Lift. This self-aligning guide system allows for a margin of error when mounting a demountable body. The specially designed tapered guide rails automatically position the body into the proper locking position, ensuring that the two rigid body locking bars match the over-center locking hooks on the Chassis Lift.

TruckTainer Body Base Frames are used in lieu of a truck body builder's standard crossmembers and long sills. Constructed to the length and width required to meet the needs of the body builder, TruckTainer Body Base Frames are designed to be body builder friendly and require minimal custom work by the truck body manufacturer.

A Complete Sub-Assembly

All TruckTainer Demountable Body Base Frames are manufactured to the specifications required for each body type. Individually engineered for particular needs, TruckTainer Body Base Frames are manufactured for all body types, including van bodies, flatbeds, curtainside, refrigerated, and specials. Body lengths available range from 10' to 28' for body widths up to 102".

Demountable Concepts, Inc. is not a van body manufacturer, but will coordinate the implementation of a customer's needs to provide a finished, road-ready delivery fleet. Together with a national van body manufacturer, or working directly with a customer's local truck body builder of choice, Demountable Concepts will ensure that all aspects of your TruckTainer fleet are implemented properly and efficiently.

Demountable Concepts, Inc. is not a van body manufacturer,

  • Country:United States
  • telephone:1-800-254-3643
Demountable Concepts, Inc. is not a van body manufacturer,
*Your name:
*Your Email:
*To:Demountable Concepts, Inc.
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters Remaining: 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

We do inquire for you , please wait ...