Rubber O-ring and seal
1.Material: Viton, Silicon, EPDM, NBR, Neoprene, SBR .Natural and so on
2.And colors and sizes are ok
Delivery Time: | 10-12days |
Package: | Packing: Polybag and carton or Customerized |
Supply Ability: | 1000000 Piece/Pieces per Month |
Minimum Order Quantity: | 100 Piece/Pieces |
Payment Terms: | T/T |
Model Number: | FY-890 |
Place of Origin: | Guangdong China (Mainland) |
The O-type sealing ring is a rubber sealing ring with a circular cross-section. Because its cross-section is O-shaped, it is called an O-type rubber sealing ring, also called an O-ring. It began to appear in the mid-19th century, when it was used as a sealing element for steam ...
Come From Pansto Pump Co., Ltd
The O-ring is an extrusion seal. The basic working principle of the extrusion seal is to rely on the elastic deformation of the seal to cause contact pressure on the sealing contact surface. If the contact pressure is greater than the internal pressure of the sealed medium, ...
Come From Pansto Pump Co., Ltd
The O-rings of horizontal slurry pumps can be divided into static seals, reciprocating seals, rotating seals and switch seals according to the relative movement state between the seal and the sealed device. According to the compression amount (tightness) of the O-ring ...
Come From Pansto Pump Co., Ltd