TRH-70

       Viscosity (mPa s)                 600-2000

                 pH                             9.75-10.75

       Alkali (NH3) content(%)            < 0.6

       Rubber content (%)               66.5-69.5 

       Total solid content (%)            68-71

TRH-70 specification as follows.

TRH -70 is the high solid natural rubber latex which we developed.            
As for the commercialized natural rubber latex, density 61% product is the mainstream now; is gloves / a balloon / a form mainly            
It is used a lot for molding uses such as the rubber and an adhesive use.            
In addition, the thing which was concentrated to about 68% solid by evaporation method / method to improve drying characteristics in particular            
It is commercialized.            
However, borrow the latex made by evaporation method of causticity by process of manufacture, and soap is used; of the high density            
The dry nature is not good comparatively. In addition, it is existence by a fault that strength is weak as for the dry film, and absorbency is high            
I do it.            
So that agent that the latex made by method is used at the time of production remains in a product            
Is similar, and a chestnut - phenomenon goes at the time of the storage of the long term, and low density of the lower department advances the high solid of the upper echelon;            
I caused .            
I developed TRH -70 to improve these faults.            
TRH -70 produced it by evaporation method with the special production device.    

High solid natural rubber latex for adhesive use (e.g. shoe)