PP Anticorrosion tape

3) The storage time is 12 months. It should be kept in a cool place at530,75, away from heat or open fire.

2) If it has been stored or transported in the temperature below 5, it has to be put in the place at about 20 for 48hours before it is installed.

1) Keep it away from insolation, rain, or pressing.

IV Transportation and Storage

3) 5 to 10 minutes after the prime coating surface dried, the wrapping can be started.
4) Back to the duct: After passing all the inspection, it can be put back to the duct.

2) Primer coating: Specialized matching primer is supposed to be used. During the process keeping it away from the fire, mix it evenly and use clean brush, roller or other mechanical method to coat it. The appropriate primer quantity applied is 12L by manual coating, and 20L by mechanical coating.

  dry. If the rust is removed manually, the effect should reach St3; if mechanically, the effect should reach Sa2 and comply with SYJ4007 86.

1) Surface treatment: Remove rust, welding spatter, burr, oil or filth and keep it clean and

III Methods of Application

          5-50

Application Temperature

14

              <0.35%

Water Absorptivity

13

Cold-applied Polypropylene Fortifying Fiber Anticorrosion Tape ,pipe wrap tape,bitumen tape