Ptfe Sheets

The inherent plasticity of PTFE allows it to extrude into the irregularities of the thread, so filling any voids or passages. It is inert to acids, solvents oil, etc. and will not contaminate the liquid being handled.

 

Unsintered pure PTFE in tape form is the standard material for sealing threaded joints and connections. Joints can be taken apart long afterward without any trouble. It is virtually a universal sealing material which can be used on pipes of galvanized Iron, Rubber, Copper, Plastic Brass, Aluminium, Stainless Steel, Ceramic, Monel, Carbon etc.

 

Thickness: 0.075 mm

Length: 12 mtrs

Width: 12.5 mm to 25 mm (1/2 inch to 1 inch)

Standard Sizes:

 

Diameter: 6 mm to 75 mm

Standard Sizes:

 

PTFE Balls

 

Length: 67.5 mm

Size: 25 mm NB to 300 mm NB

Standard Sizes:

 

PTFE QVF Bellows

Other Common PTFE Products

  

Thickness: 0.5 mm per flap; total 1mm thk

Size: 15 mm NB to 600 mm NB

Standard Sizes: as per ASA 150#

 

PTFE Envelopes

 

Thickness: 1.5 mm, 2 mm, 3mm

Size: 15 mm NB to 300 mm NB

Standard Sizes: as per ASA 150#

 

PTFE Solid Ring Gasket

 

The inherent plasticity of PTFE allows it to extrude into the irregularities of the thread, so filling any voids or passages. It is inert to acids, solvents oil, etc. and will not contaminate the liquid being handled.

 

Unsintered pure PTFE in tape form is the standard material for sealing threaded joints and connections. Joints can be taken apart long afterward without any trouble. It is virtually a universal sealing material which can be used on pipes of galvanized Iron, Rubber, Copper, Plastic Brass, Aluminium, Stainless Steel, Ceramic, Monel, Carbon etc.

 

Thickness: 0.075 mm

Length: 12 mtrs

Width: 12.5 mm to 25 mm (1/2 inch to 1 inch)

Standard Sizes:

PTFE Tape (Thread Sealant)  

 

We provide customized (special) sizes on request;

 

          1000 mm width x 1000 mm length

Sizes: 300 mm width x 300 mm length

Thickness: 1.5 mm to 30 mm

Standard Sizes:

Thick (Rigid) Sheets

PTFE Sheets

 

We can provide customized (special) sizes on request;

PTFE Etched Sheets: When you need to glue PTFE to the surface of another material such as stainless steel, a process called "etching" is required. Typical applications would include the lining of chemical process tanks or other equipment used in caustic environments.

 

Length: Available in roll form or length cut to order

Width: 300 mm to 600 mm

Thickness: 1.5 mm to 3 mm

Standard Sizes:

Thin Sheets (Skiving Sheets)

PTFE Sheets

 

Please note Fillers such as Glass/ Carbon/ Graphite/ Bronze + MOS^2; are available for PTFE Rods and Bushes

 

We can provide customized (special) sizes on request;

 

Length: upto 50 mtrs

Wall thickness: 3 mm to 25 mm

Inner Diameter O.D.: 19 mm to 89 mm;

Outer Diameter O.D.: 25 mm to 100 mm;

Standard Sizes:

Rigid

PTFE Pipes

 

We can provide customized (special) sizes on request;

 

Length: 3 mtrs to 120 mtrs

Wall thickness: 0.8 mm to 1.6 mm

Inner Diameter I.D.: 1.6 mm to 25.1 mm;

Outer Diameter O.D.: 3.2 mm to 28.0 mm;

Standard Sizes:

Flexible

PTFE Tubing

 

We can provide customized (special) sizes on request;

 

Length: 100 mm to 300 mm

Inner Diameter I.D. range : 12.5 mm to 250 mm;

Outer Diameter O.D. range : 12.5 mm to 250 mm;

Standard Sizes:

 

PTFE Bush

Also available in Glass filled and Carbon Filled

We can provide customized (special) sizes on request;

 

Length: 300 mm and 1000 mm 

Diameter: 3 mm to 300 mm;

Standard Sizes:

 

PTFE Rods

P. T. F. E. Products i. E. Rods, Sheets, Bush, Tubings, Bellows, Envelope gaskets, Pipes, Sealant tape, Flex o Seal, e