sandwich-panels PVC

     The surface of plastic can be matte, semi glossy, glossy. If you are specialized on slopes  installation, pay attention to sandwich-panels made from foamed plastic (Trovitex). Such sandwich-panels have a specific surface "shagreen leather" which is ideally combined with a window sill, and the area is optimum for economic sawing (3050x1560 mm). If you are interested in any other products, 

    Standard thickness of sandwich-panels let out by us are: 10 mm, 24 mm, 32 mm. Can be technically made a sandwich-panel with thickness from 5 up to 100 mm, with step in 1 mm.

    As filling for our sandwich-panels we use extrusion cellular polystyrene by PENOPLEKS ? - a bright representative of new generation of thermally protected materials. It is ideal for solving the problem such as savings the heat. The basic advantages of a material: low heat conductivity, the minimal water absorption and high durability. Besides cellular polystyrene - ecologically pure material, by the nature chemically inert, is not subject to rotting and is steady against burning. All these qualities make our sandwich-panel irreplaceable in furnish and warming of window slopes.

    We use high-quality plastic of German firm Rochling Engeenering Plastic. For the color sandwich-panel manufacture also is used plastic of German firm Rochling Engeenering Plastic laminated by a film at factory Renolit.

     Products have the hygienic certificate and the fire certificate, and also other documents on the safety which are required by the current legislation. Products under normal conditions and storage should have none effect on a human organism. Panels are not a dangerous cargo and in accordance with 19433 are not classified. Transportation and storage is made according to 25880. Storage and use of panels near to the open sources of fire is forbidden.

    Our company makes sandwich-panels with both smooth, and with structural surfaces (white firm PVC, the white made foam PVC laminated by coloured film RENOLIT, PVC with structure " in imitation tree "). The wide spectrum of colours allows them to be combined equally both with designs of PVC, and with aluminium or wooden. All production is made according to properly registered 5772-001-70290258-2005.

     Traditionally a sandwich-panel is used in window manufacture for filling opaque fragments balcony doors and installation of slopes. Apart from this by means of a sandwich-panels it is possible to correct building mistakes or very greater tolerance on not plastered, draft surfaces. It  also advisable to use sandwich-panels as a wall partitions where fast installation, ideal parallelism and small thickness are very important. Owing to the moisture resistance, sandwich-panels are unique for bathroom furnish. Thus a sandwich-panel should provide first of all thermal protection and sound insulation. Such characteristic, as stability to ultra-violet radiation is also important.

simplicity of installation

 a high technological level of factory manufacturing

excellent thermal protection

Distinctive feature of a sandwich-panels as general construction material