High-Density Silicone Elastomer

SECTION 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Generic Description:
Physical Form:
Color:
Odor:
Silicone Compound
Viscous Liquid
Straw
Some odor
PCI-Promatec
11707 West Sam Houston Parkway South
Suite K
Houston, TX 77031
281-933-7222
SECTION 2. OSHA HAZARDOUS COMPONENTS
CAS number Wt % Component Name
112945-52-5 <1% Fumed, Amorphous, Silicon Dioxide, Crystalline Free
7440-66-6 35%-45% Zinc Metallic
1314-13-2 <5% Zinc Oxide
7727437 30%-40% Barium Sulfate1
1
The amount of respirable silica is less than 0.1% at 10 microns.
NFPA Profile: Health: 0* Flammability 1 Instability/Reactivity 1
* When supplied component premixed; this is the normal packaging. Where dry zinc dust is present,
(unlikely for product as supplied) Health: 2 Flammability 0 Reactivity 2
SECTION 3. EFFECTS OF OVEREXPOSURE
Acute Effects:
Eye: Direct eye contact may cause temporary redness, discomfort and possibly mechanical
irritation and/or abrasion of the cornea.
Skin: No significant irritation expected from a single short-term exposure, avoid prolonged,
repeated or excessive contact with skin.
Inhalation: No significant irritation expected from a single short-term exposure, avoid prolonged,
repeated or excessive inhalation of dry powders, if present, which may irritate
respiratory tract.
Oral: Low ingestion hazard in normal use. Nausea, gastric pain, metallic taste may be an
indication of gross ingestion or, although unlikely, exposure to zinc dust or fumes.
Prolonged/Repeated Exposure Effects:
Skin: No known applicable information.
Inhalation: No known applicable information.
Oral: No known applicable information.
MATERIAL SAFETY DATA SHEET PCI-Promatec TS-MS-0080A Part B
Page 2 of 7
2002/01/18 9-15-2000 Revision Date 3/12/2007
Signs and Symptoms of Overexposure:
No known applicable information for product as supplied.
Medical Conditions Aggravated by Exposure:
Exposure, although unlikely, to the dry powder components of this product may
aggravate conjunctivitis of the eye, dermatitis of the skin, asthma and other
respiratory diseases.
SECTION 4. FIRST AID MEASURES
Eye: Remove contact lenses if present, immediately flush with water, if irritation persists,
seek medical attention.
Skin: No first aid should be needed, area may be flushed with water and a mild soap may
be used if available. If symptoms persist, contact a poison control center, emergency
room or physician for treatment information
Inhalation: No first aid should be needed, however, although unlikely, if there is a gross
inhalation of respirable dust, remove the person immediately to fresh air, If
symptomatic, contact a poison control center, emergency room or physician for
treatment information.
Oral: No first aid should be needed, however, if a gross ingestion of the dry powders
occurs, gently wipe or rinse the inside of the mouth with water. Sips of water can be
given to a conscious person. Contact a poison control center, emergency room or
physician for treatment information.
Comments: Treat symptomatically.
SECTION 5. FIRE FIGHTING MEASURES
Flash Point: 212