High Transparent Self-bonding Silicone Gel

The components A and B must be stored seally and separately, be careful of leaking when in transporation.

Its the non-dangerous goods, and it should be transported as the common  chemicals

Keep in dry place, the shelf time is 1 year(Below 25)

5.Storage and transportation:

If you have some questions in whether the material is bate the cure ability or not, we suggest that you should do a small experiment about its compatibility  to test if its suitable . If it has some un-cured products between material to gel, it shows that they are incompatibility, the material bate to cure.

Some materials,chemicals, curing agents and plasticizers may bate the cure ability of gel. The covered materials including: 1.Organotin and organometallic compound;2. The silicone contain Organotin activator.3: Sulfur, polysulfide, sulfones and other material containing sulfur.4.Amic, urethane rubber or materials containing amic;5. Dialifos or materials containing dialifos;6. Unsaturated hydrocarbon plasticizer;7.Acidity articles( Commonly its the organic acid) 8.Some flux residue.

4.Notice:

Mixing up silicone conponents A and B with volume or weight ratio 1:1 exactly and whipping it equably. Both hand operation and full automaticity mixing measuring equipment operation will be ok. If it allowed you can use vacuum pump vacuumizing it then encapsulating,or let the silicone discharge air bladder by encapsulating directly .If the ratio is not exact or incompletely to mix up and whip the mixture, it may affect  the cure ability .

3.Usage

10minutes

150

10

30minutes

100

9

24hours

Room temperature

Curing time

8

10¹⁵

Volume resistivity

High Transparent Self-bonding Silicone Gel
dampproof and non-corrosion