Fast curing silicone rubber

      These figures are for reference only, Please  contact us for detail.

      Some organic pigment will also lead to slowing in  curing speed or uncuring.

           difficult in defoaming process .Please pay special attention when the temperature is high.

      In principle, the viscosity of the silicone will increasing gradually then crosslinking, which will lead to

      The mixture should be used up within 4 hours, after mixing DS1016A and DS1016B in room  temperature.

       poisonous,especially,prohibit contacting PVC,since it contains Pb ,which will  lead to catalyst poisoning.

             chemical compound including acetylene series and vinylidene, to avoid uncureing caused by platinum catalyst

Prohibit contacting such organics as NPS  and  plasma chemical compound like SnPbHgBiAs,also the

9. Remarks

3.0KN/m

10.0KN/m

Tear strength

160

300~400

Elongation at break

2.0Mpa

2.5~3.0Mpa

Tensile strength

20

two components, curred in low or room temperature, have a Little strength, suitable for adult toys.