Its the non-dangerous goods, and it should be transported as the common chemicals.
Keep in dry place, the shelf time is nine months(Below 25)
7.Storage and Transportation:
Specification:40kg/set(A20 kgB20 kg); 400kg/setA200 kgB200 kg
6.Package:
5This product should be avoided being mixed with another kind of organic tin catalyst such as amines, sulfur, phosphorus compounds and some metal salts.Otherwise,the catalyst of this product will be useless that the mixed material will not be cured.
4Its non-dangerous goods.But pls dont have it touch mouth or eyes .If it happens,pls flushing yourself quickiy with enough rinsing.
3It has the connection for curing time to temperature of the material, the lower for the temperature,the longer for its curing time.
2The mixed material should be in sealed storage and be used up during the safety operation,or itll slowly cure to wastage
1 Mixing A&B compenent equably before using.
5.Precautions:
Injection molding:Put the mixed material which has been defoamed into the mold.The injection molding should be made under appropriate pressure,temperature , cycle and other conditions.
pumped when there is no bubble. Deaeration time is suggested to be 5 to 10 minutes or so.If there is no deaeration device,the next step can be proceeded when there is no foam in the mixed material,usually one hour after mixing.
Whipping: Adding B to vessel with A then mixing equably.
Defoaming:: Put the mixture in the vacuum deaeration device.Usually,it should not be
Measurement: Be exact Metage for A and B components.
4.Usage:
2.0
2.0
2.0
2.0
2.0
%
Linear Shrinkage
13
12
11
10
8
%
Tensile set
30
30
35
35
15
N/mm
Tear Strength
300
400
550
500
400
%
Elongation At Break
7.0
8.0
8.0
7.5
6
Mpa
Tensile Strength
70
60
50
40
30
ShoreA
Hardness
1.14
1.13
1.10
1.08
1.07
g/cm3
Gravity
700
500
300
70
50
Pa.S
Voiscosity
Semi-transparent
Semi-transparent
Semi-transparent
Semi-transparent
Semi-transparent
Exterior
Item
ADL3106-70
ADL3106-60
ADL3106-50
ADL3106-40
ADL3106-30
Unit
Property Model No.
3.Technical parameters:
ADL3106 serious has excellent elasticity and properties of anti-aging and resistence to high temperature afer curing under certain temperature(the temperature can be adjusted according to different demand).It has low linear shrinkage,resistence to impact fatigue,good thermal stability and cold resistence(the operating temperature is 60250).Below 20 ,the safe operating time in a sealed state after component A and B being mixed is 2 days.When the temperature becomes higher,the operating time will be shortened.
This product is high tensile injection mold RTV2 liquid silicone rubber.It is suitable for cook,orings, rubber covered roller,keypad, rubber wares and other silicone rubber products.
2.Features:
1.Application:
Model No.:ADL3106serious
ADL 3106 Injection Molding Silicone Rubber
ADL 3106 Injection Molding Silicone Rubber
It is suitable for cook,orings, rubber covered roller,keypad, rubber wares
color: | semi-transparent |
Model Number: | ADL3106 |
Brand Name: | Andalu |
Place of Origin: | Guangdong China (Mainland) |
Injection Mold Design Engineering Injection mold engineering is a procedure at the first stage of injection molding process, which develops the injection mold designs to improve the effectiveness and efficiency in injection molding. Plastic mold design technical team of R&D and ...
Come From Taizhou Huangyan Fow Mould CO., LTD
Insulator Silicone Rubber is one of the most widely used materials for insulating electrical equipment due to its excellent electrical insulating properties. YF POWER, a leading manufacturer of electrical equipment, produces high-quality insulator properties silicone rubber ...
Come From Guangdong Yufeng Industries Co.,Ltd
Plastic Mould Industry The industrial plastic injection mold is replacing metal products in many fields of industrial applications to meet the requirement of lightweight industrial equipment and cost-reduction. Green Vitality has accumulated many experiences over the years in ...
Come From Green Vitality Industry Co., Limited