Label Liquid Silicone Rubber

Its the non-dangerous goods, and it should be transported as the common  chemicals.

Keep in dry place, the shelf time is nine months(Below 25)

8.Storage and Transportation:

Specification:40kg/set(A:20kg,B:20kg)

7.Package:

(4)This product should be avoided being mixed with another kind of organic tin catalyst such as amines, sulfur, phosphorus compounds and some metal salts.Otherwise,the catalyst of this product will be useless that the mixed material will not be cured.

(3)Its non-dangerous goods.But pls dont have it  touch mouth or eyes .If it happens,pls flushing yourself quickiy with enough rinsing.

(2)has the  connection for curing time to temperature of the material, the lower for the temperature,the longer for its curing time.

1Mixing  A&B compenent equably before using.
The mixed material should be in sealed storage and be used up during the safety operation,or itll  slowly cure to wastage

6.Precautions

Injection molding:Put the mixed material which has been defoamed into the mold.The injection molding should be made under appropriate pressure,temperature , cycle and other conditions.

Measurement: Be exact Metage for A and B components.
  Whipping: Adding B to vessel with A then mixing equably.
Defoaming:: Put the mixture in the vacuum deaeration device.Usually,it  should not be pumped when there is no bubble. Deaeration time is suggested to be 5 to 10 minutes or so.If there is no deaeration device,the next step can be proceeded when there is no foam in the mixed material,usually one hour after mixing.

5.Usage:

180/5-10min

Curing Conditions

30-400A

Hardness

Label Liquid Silicone Rubber
It has high transparency,lightly,strong sense of three-dimension