Magic Liquid silicone----reproduce every design!

 Mobile:86-13631574524

Fax:86-755-89948030

Tel: 86-755-89948294

Any more information or technical support on Liquid silicone,psl feel free to contact Miss Vivian.

.

       The silicone rubber mold has few molding times is due to follwoing reasons: adding too much silicone oil which will destroy the molecular of silicone rubber; making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break; making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. 

Why does the silicone rubber mold have few molding times?

4.      Frequently asked questions of Liquid silicone

.

(Note: our company does not recommend you to add silicone oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demould.)

If the customer wants to make large products and large size molds, the mold should be made of silicon rubber with high hardness. On the contrary, if the mold with fine and precision patterns, it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demold, more curing agent is needed; contrarily, if molds requiring slower drying and demold, less curing agent is needed.

3.      Liquid silicone for mold making operations

.

Liquid silicone for mold making is white or red flowing liquid with general hardness of 22-50A

Liquid Silicone is used for silicone rubber molding for:
1) PU crafts
2) Poly resin crafts
3) Gypsum crafts
4) Cement