self-bonding electronic silicone gel

5.Storage and transportation:

If you have some questions in whether the material is bate the cure ability or not, we suggest that you should do a small experiment about its compatibility  to test if its suitable . If it has some un-cured products between material to gel, it shows that they are incompatibility, the material bate to cure.

8.Some flux residue.

7.Acidity articles( Commonly its the organic acid)

6. Unsaturated hydrocarbon plasticizer;

5. Dialifos or materials containing dialifos;

4.Amic, urethane rubber or materials containing amic;

3. Sulfur, polysulfide, sulfones and other material containing sulfur.

2. The silicone contain Organotin activator.

1.Organotin and organometallic compound;

The covered materials including:

Some materials,chemicals, curing agents and plasticizers may bate the cure ability of gel.

4.Notice:

Mixing up silicone conponents A and B with volume or weight ratio 1:1 exactly and whipping it equably. Both hand operation and full automaticity mixing measuring equipment operation will be ok. If it allowed you can use vacuum pump vacuumizing it then encapsulating,or let the silicone discharge air bladder by encapsulating directly .If the ratio is not exact or incompletely to mix up and whip the mixture, it may affect  the cure ability.

3.Usage

10minutes

150

10

30minutes

100

9

24hours

Room temperature

Curing time

8

10¹⁵

Volume resistivity

electronic silicone gel, protect the sensitive micro-electronics like solar cells,sensors and electronics widely used in cars,la