HTV silicone rubber for cake mold with FDA

Any further information required ,pls feel free to contact Miss Corrin Tynee via  0086-755-89948013 and the mobile 0086-15012962876 . Welcome to visit  www(dot)szrl(dot)net anytime .

4.It is forbidden to mix with organic compounds of condensation cure silicone rubber, otherwise, the silicone rubber will not cure or vulcanize. It also should keep from organic compounds containing S,P,N, and metal salt of organic acid which causing silicon not cure or unvulcanized.

3.The service life is 12 months, it can be used after reinspection when exceeding time limits.

2.It is non-dangerous goods, should be stored at a cool and dry place, keep from sun and rain.

1.The material is packed in 20kg per drum.

Package and storage precautions:

3.The curing time is subject to the temperature, short time will be required under high temperature, long time will be required while the product with large thickness.

2.Mixing component A with B evenly according its mix ratio, it is ready for use after degassing , it cures by heating up the temperature when pouring into the mold.

1.Applicable to the injection molding process

Using Instructions of HTV silicone rubber:

Low Viscosity, good operability, exceptional fluidity  , good temperature, solvent resistance, and insulation properties, excellent tensile and tear strength, as well as good elasticity.

Main features of HTV silicone rubber:

It mainly use for making precision molds, silicon insoles, food grade molds(chocolate, cake moulds) life casting silicon products, fabric finishing, seal for electronic components and solar circuit board, trademark decoration, baby nipples, cable accessories, etc.

Applications of HTV silicone rubber:

Low Viscosity, good operability, exceptional fluidity, good temperature, solvent resistance, and insulation properties, excelle