wholesales of RTV-2 molding silicone rubber

Any further information required ,pls feel free to contact Miss Corrin Tynee and call the number 0086-755-89948013 and the mobile is 0086-15012962876. Welcome to visit  www(dot)szrl(dot)com and call for any time .

(Note: our company does not recommend you to add silicone oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demould.)

If the customer wants to make large products and large size molds, the mold should be made of silicon rubber with high hardness. On the contrary, if the mold with fine and precision  patterns, it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demould, more curing agent is needed; contrarily, if molds requiring slower drying and demould, less curing agent is needed.

RTV-2 molding silicone rubber is white or red flowing liquid with general hardness of 22-50A

Silicon features: 1) For mold making, for pad printing. 2) high tensile, tear-strength.etc.3) low shrinkage 4) non-deformation