RTV-2 moulding silicone rubber

FAX: 86 755 89948030

TEl: 86 755 89948013

if you need more information ,you can contact with Miss Ava,

silicone oil can be added to soften the mold for easy demould.)

silicon mold or fine detailed and complex patterns products are required, 5%-10%

(Note: our company does not recommend you to add silicone oil. If a special soft

agent is needed.

needed; contrarily, if molds requiring slower drying and demould, less curing

the customer. If molds requiring fast drying and demould, more curing agent is

hardness. The amount of the curing agent depends on the actual requirements of

mold with fine and precision  patterns, it should be made of silicon with low

should be made of silicon rubber with high hardness. On the contrary, if the

If the customer wants to make large products and large size molds, the mold

Silicon rubber for mold making operations

good tensile strength ,tear strength and elongation.

high-temperature, acid-alkali and expansion as well as high reproduction times,

silicon rubber mold which features with resistance to deformation,

hardness of 22-50A

Silicon features:
1) For mold making, for pad printing.
2) high tensile, tear-strength.etc.
3) low shrinkage 4) non-deforma