silicone material

Mobile: 0086-15018537034

Tel: 086-755-89948019

If you want to get further information about our hot stamping silicone rubber plate  product, PLS contact with Miss Yolanda wu:

.

c. Cover a glass cloth on it after another 30 minutes of a second cross linking reaction, and use a brush pen or a brush to avoid any interstices.

strength of the mold.

b. After the cross linking reaction ( about 30 minutes ),brush a second coat which can increase the tension and tear

a. Evenly brush the mixed silicon rubber on the product which is covered with mold spray with a brush or a brush pen.

Brushing cast:

  Step Three: Brushing cast & Perfusion Molding operation

  reaction, and no more further steps will be available.

  Without exception, this takes less than 10 minutes. Otherwise, it will cause cross linking

  Step Two: vacuum pumping

   Step One:Take 100g of part A and add 2g of part B and mix the silicon rubber and the curing  agent evenly.Note:Molding silicon rubber is a kind of flowing liquid and it contains two parts.  Part A is a kind of white flowing liquid and part B is the curing agent. Remember to mix part A andpart B evenly, otherwise the silicon rubber will be partly solidified and this will give birth to difficulties in your final operation. What's more, the finished moulds will meet  a short life.  All of these will cause a waste of silicon rubber materials.

Operations for molding silicon rubber:

        RTV-2 molding silicon rubber is mainly applied for making various molds,such as reproduction of poly resin, epoxy, polyurethane-polymer, plaster, gypsum, soaps, candle & lighting, architecture, decorative  arts and crafts, plastic toy, gift and stationery, big statue, cultural relic product, etc..

Applications of RTV-2 molding silicon rubber

2-4

0.5

2-3