silicone rubber for statue Buddha,plaster mold

silicone rubber for mold applications:
Tin-based silicone, also called condensation-cure silicones,are two component materials
tin cured silicone can be poured onto models or they can be made brushable by adding a thixotropic additive, tin cured silicones can be used for casting polyurethane,epoxy and polyester resins, waxex, all gypsum products and low-temperature metals.

silicone rubber for mold features:
silicone can be cure at room temperature RTV to flexible, high tear-strength rubbers,there are ideal for molds where easy release or high temperature resistance is required.

silicone rubber for  mold using instructions
Thoroughly shake/stir the curing agent before use. Weigh out 100 parts of Silastic S Silicone Moldmaking Rubber base and 2or 3 parts of curing agent in a clean container. Accurate weighing is essential, as inaccuracies can cause a significant decrease in the performance of the cured rubber (the base to curing agent ratio must be between 100:2 and 100:3). Mix until the curing agent is completely dispersed in the base and a uniform color is obtained.

How to make silicone rubber for mold
During operate the three impotant thing to pay attention :
  1. weigh theliquid silicone rubber and curing agent exatly .
  2. Stir theliquid silcone rubber and curing agent evenly .
  3.we shouldchoose the right hardness to making diffirent size of product mold.


Whatever you have any further information required or suggestion, pls feel free to  call the number of 0086-755-89948006 and mobile 0086-15220170905(Ms.Shirley)
Welcome to visit our website: www dot szrl dot net

Thank you for your attention.

silicone for making silicone molds with high reproduction
silicone manufacturer with best quality and best service.