news!!!RTV-2 silicone making mold by pouring way

Ms Shirley Zheng

Whatever you have any further information required or suggestion, pls feel free to send  also can call the number of 0086-755-89948006 and mobile 0086-15220170905(Ms.shirley)
Welcome to visit our website: www dot szrl dot net

Thank you for your attention.

2 making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products.

1 adding too much silicone oil which will destroy the molecular of silicone rubber; making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break;

The RTV-2 silicone  has few molding times is due to follwoing reasons:

Why does theRTV-2 silicone have few molding times?

Frequently asked questions of RTV-2 silicone

(Note: our company does not recommend you to add silicone oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demould.)

If the customer wants to make large products and large size molds, the mold should be made of silicon rubber with high hardness. On the contrary, if the mold with fine and precision  patterns, it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demould, more curing agent is needed; contrarily, if molds requiring slower drying and demould, less curing agent is needed.

RTV-2 silicone  operations

RTV-2 silicone  is white or red flowing liquid with general hardness of 22-50A

RTV-2 silicone with high tensile strength, high tear strength, high reproduction for mold making