Brush silicone rubber(RTV tin catalyst condensation series)

Tel:0086-755-89948006  or 0086-15889795980

Brushable silicone rubber(RTV-2) :
production mold casting wax, gypsum, concrete or resins (urethane, polyester, etc.). Applications include reproducing sculpture, architectural restoration, making candle molds, casting pewter, place couldnt pour rubber over the above etc. For make a mold by brushing (or spraying) rubber onto the model. Rubber will hold a vertical surface and will reproduce the finest detail brushed onto the model in layers until a suitable thickness is built up. The rubber is allowed to cure and a support shell is applied prior to demold. The advantage of making a mold by brushing rubber onto the model is that it minimizes the amount of rubber used, saving material costs
Sprayable Rubber For making fast sprayed rubber molds that have the best release properties for production casting of resins, plaster, etc. it is a tin silicone rubber that self-thickens for making concrete Spray able -on molds . Properly applied, Mixed 100A:5B by weight, rubber quickly develops thixotropy when mixed in air. Cured with negligible shrinkage to a durable mold rubber good for production casting resins, foams,concrete, plaster and other materials. Application of a support shell is achieved by spraying over the rubber mold after it has fully cured
Silicone Putty:Mix & Apply By Hand Silicone putties are two-component, tin-cure silicone putties that can be applied "on-site"--directly to almost any model; capturing the finest detail and curing within minutes. Silicone Putty has been used to make molds of valuable antiques and archeological models and can be used to make fast molds of sculpture, prototypes, candles, picture frames, coins, etc. Also can cast wax, gypsum and a variety of resins into Putty molds.
or any details information please contact us

Silicone rubber is allowed to cure and a support shell is applied prior to demold. The advantage of making a mold by brushing