BADGE LAPEL PIN COIN MEDAL CREST EMBLEM

Jennifer (Li-Min) Chen Outabiht

Judy CHEN (Mrs. HO)

HO JUNG-SIUNG, President

FAX:886-2-22232798

TEL: 886-2-22220984. 886-2-22220964           

TAIWAN, REPUBLIC OF CHINA

P.O.BOX: 91-263 Taipei     

MANUFACTURERS & EXPORTERS

SEAL  CREST  INC.    

1.     The casting process is recommended for intricate shapes with numerous

 

Cast pins

4.     Clear epoxy is recommended to protect the surface from color fading and scratching.

3.     There are no metal lines to separate the colors.

2.     This computerized printing process may reproduce any colored artwork or photos.

1.     Customers artwork, films, or graphic files are used to produce films for each color (C.M.Y.K.). Then, one printing plate for each color is produced for the design.

 

Offset Printing

4.     Clear Epoxy is recommended to protect the surface from scratching.

3.     PMS colors are used for reference.

2.     It can achieve a close duplication of the original color artwork.

1.     This process is designed to complement other processes that have areas hard to fill with enamel colors because no metal lines are required to separate different colors.

 

Silkscreen Printing

6.     Clear epoxy is recommended to protect the enamel from color fading and cracking.

5.     Metal lines are required to separate different colors. Silkscreen colors may be added to enhance small details.

4.     PMS colors can be matched.

3.     No inside holes are allowed.

2.     Soft enamel is inserted into the recessed areas.

1.     The design is transferred from a photographic negative onto a thin brass metal. An acid reaction process then etches the surface of the metal.

 

Photo-etched Soft Enamel

5.     Silkscreen cannot be combined with die-struck soft enamel due to the uneven surface between the metal and enamel color.

4.     Metal lines are required to separate different colors. Clear epoxy is recommended to protect the enamel from color fading and cracking.

3.     PMS colors can be matched.

2.     The recessed areas are filled with soft enamel.

1.     The mould and outline cutting processes are similar to Cloisonn

Cloisonne Hard Enamel, Imitation Cloisonne Epola, Die Struck Soft Enamel, Photo etched Soft Enamel, Silkscreen Printing, Offset