Tyres ST175/80R13 ST205/75R14 ST205/75R15 ST215/75R14 ST225/75R15 Tires

Make sure you regularly check the spare tyre's air pressure, existence/non existence of damage and the depth of remaining grooves regularly.

5. Check the spare tyre

In absence of good maintenance, abnormal wear may occur due to sudden braking. You should check air pressures, alignment and rotate the tyres regularly. In addition you should avoid bad driving habits such as sudden acceleration, braking and cornering.

4. Abnormal tyre wear should be treated instantly

If you drive with materials such as stone in the tread groove, or with a nail stuck in the tyre, the tyre can become punctured or ruptured. You should change the tyre immediately on discovering any damage to avoid any further damage to the carcass.

3.A damaged tyre can rupture during operation

If you drive with low air pressure in your tyre, heat is generated in the tyre. This can result in the rubber and cord separating, which in turn leads to the cord becoming cut and puncturing the tyre. Low pressure can wear the edge of tyre which will shorten the tyre's life.
Excessive pressure results in the tyre becoming unpredictable. If the tyre suffers an impact, it is easily ruptured and cut. If you brake hard, the tyre may skid, which reduces tyre life as the centre of the tread becomes worn

2.Incorrect air pressure shortens the life of the tyre

Tyres with tread under this limit will slide easily, suffer from extended braking distances and will be more susceptible to rupturing. In wet conditions the vehicle will aquaplane, making braking and handling almost impossible. Tyres with tread under this limit are illegal and may lead to a fine or disqualification.

1.You must not use a tyre which has a tread under 1.6 mm

About Tyre Safety

Attention:we supply services of fitting steel wheel with tyre

ISO9001: International Standard Organization
DOT:Department of Transportation of U.S.A
E- Mark :European Economic Community
EC: Tyre road noise emission--sound approval
C.C.C:China Compulsory Product Certification
JIS D 4230: Japanese Industrial Standard

Our tyres or tires are certified by following certifications:

1)ST175/80R13
2)ST205/75R14
3)ST205/75R15
4)ST215/75R14
5)ST225/75R15

We offer different type of DOT approved tyres or tires,following size are available:

Description

Tyres size at ST175/80R13 ST205/75R14 ST205/75R15 ST215/75R14 ST225/75R15 Tyres

We offer DOT approved solid tyres size at ST175/80R13,ST205/75R14,ST205/75R15,
ST215/75R14,ST75R15