hot sale!! OP-COM auto scanner

OP-COM
1. Weight:  0.25kg
2. This interface works with OP-COM software which covers almost all
Opel cars, even new cars with CAN- BUS based diagnostic, such as
Vectra-C, Astra-H, Zafira-B.
3. The program lets you to read out and clear fault codes, shows live
data, lets you to perform output test, and supports remote and key
programming.  It supports many control units, like Engine, Automatic
Transmission, ABS, Airbag, Engine Cooling module, Instrument
Cluster, Electronic Climate Control, Body Control Unit, just to name
a few examples.
4. Since Opel uses many pin in the OBD connector, the diagnostic
interface works as a multiplexer, and selects the appropriate pin
for communication: PIN3, PIN7, PIN8, PIN12 = Serial Link ( ISO9141,
KW81, KW82, and KWP2000 )
5. Fault codes will be shown with all available information:
6. Full fault code text description
7. Full status information (Present, Not present, Intermittent )
8. You can print out, save, or copy the fault codes to any other application.
9. From the fault codes window, you can go directly to the measuring
blocks window.
10. The program shows measuring block information on many control
modules; you can choose anything from the list on your own and
also capable of showing 8 measuring block parameter simultaneously.
11. The sample rate depends mostly on the communication protocol. For example, older
system, like Omega-B X 25 DT Engine (ISO-9141-2)  can be very slow, during communication, while newer Multec, or  Bosch units are faster (using KWP-2000), and the newest CAN based
control units are very fast!
12.  Output tests on many controllers can also be run.
PIN6-PIN14
PIN3-PIN11
PIN1
HSCAN  - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
13. You will get a feedback on the state of the activated output which helps you to
find the failed components more easily.
With OP-COM software, you can learn keys to immobiliser, remote keys to the
central door locking, or alarm and also reset, program the following immobiliser
related items: ECM, BCM, IPC.
14. IF the vehicle security code is needed, it can be found on the CAR-PASS.
15. It can reset, and program the Service interval reminder on Astra-G, Zafira,
Corsa-C, Meriva, Tigra-B and also able to code SAB6, and SAB8 airbags with its'
software.
16. The OP-COM interface is USB port based, so there will be NO COMPATIBILITY
ISSUES, with serial to USB converters.
17. The speed of the communication over the USB-BUS is enough to handle the awesome
speed of the High-Speed CAN-BUS systems,which is currently 500kbps. This is the
main reason, why only the USB port based interface is available for CAN-BUS.
18. The package contains:
 OP-COM Interface

OP-COM auto scanner:
Weight: 0.25kg
This interface works with OP-COM software which covers almost all
Opel cars, even new