CNC accessories:Bluetooth RS-232 adapter and DNC software

Applications:

Remark: All contents are subject to change without notice.

19. Dimensions: 35 mm (W) x 45 mm (H) x 15 mm (D)

18. Operation Temperature: -20 to +75 Centigrade Degrees

17. Current Consumption: Max. 90 mA

16. Power Supply: +5 to +6 V DC

15. Antenna Gain: Chip antenna max. 1 to 2 dBi

14. Antenna: Chip antenna or SMA female + external antenna (optional)

13. Rx. Sensitivity: -86 dBm typical

12. Tx. Power: Max. 18 dBm (Class 1)

11. Modulation: GFSK-1 Mbps, DQPSK-2 Mbps, and 8-DPSK-3 Mbps

10. Hopping: 1,600/sec, 1MHz channel space

9. Frequency: 2.400 to 2.4835 GHz

8. Data Bit: 8 bit

7. Profiles: Serial Port Profile and Generic Access Profile

6. Standard: Bluetooth specification version 2.0+EDR

5. RS-232 Interface: D_SUB 9-pin female

4. Signal: TxD, RxD, GND, CTS/RTS

3. Connection: Point-to-point (pico net)

2. Coverage: Up to 100 m

1. Baud Rate: Supports 1.2/2.4/4.8/9.6/19.2/38.4/57.6/115.2/230.4 Kbps

Specifications:

6. External Battery Input (Optional)

5. External Dipole Antenna (Optional)

4. Internal Chip Antenna (Default)

3. Configure RS-232 parameters via COM port

2. Built-in Battery Management (Power Input & Charger)

1. Bluetooth V2.0 Class 1

Features:

(Model: BT-232B-E)

CNC accessories:wireless Bluetooth RS-232 Adapter, DNC & PDA integration

1. RS-232 interface
2. Wireless Bluetooth communication
3. Handheld data terminal integration
4. DNC software supportted