Cleaning The Fuel Injectors tools(auto tool)

auto tool

auto tool,Compression Tester,Engine testing tool

11.Test drive the vehicle for at least 15 miles to flush loosened carbon deposits out of the system...............

10.Let the vegicle is for at least 30 minutes to allow the solution to work on soft carbon deposits.

9.Remove the adapter fitting from the engine.connect the vacuum hose.

8.When the container is empty,turn the engine Off.

7.Connect the decarbonizer hose(with adapter)th the manifold vacuum port.opening the shut-off valve.(the engine will run rough and RPM will edcrease.do not manually increase PRM)

6.Locate a manifold vacuum port(not ported vacuum).near the throttle body or carburetor.(this will distribute the decartonizing solution more evenly).

5.Remove top and regulator assembly fromtop of fuel injector cleaner.Fill the container with one bottle of D-Karbonizer.Install top regulator assembly again.

Noet:Valve is OFF if it's turned all the way clockwise.

4.Close the shut-off valve at the bottom of the fuel injector cleaner.

3.Turn regulator on top of fuel injector cleanerto full open position.(counterclockwise).leave the fitting on the end of the regulator open-do Not connect shop air.

2.Run the vehicle until the engine reaches nomal operating temperature.shut the engine off.

1.Rea,understand,and follor"safey precatuons"before using Fuel Injector Cleaner.

cleaning the fuel injectors
accept OEM order
auto tool,Compression Tester,Engine testing tool
auto tool

try fuel injector    fuel injectors    to get through more products