OP-COM 2009.7 Diagnostic Tools

OP COM Interface
USB Cable
Software and Drivers CD

The package contains:

The speed of the communication over the USB-BUS is enough to handle the awesome speed of the High-Speed CAN-BUS systems, which is currently 500kbps. This is the main reason, why only the USB port based interface is available for CAN-BUS.

The diagnostic inteface is USB port based, so there will be NO COMPATIBILITY ISSUES , with serial to USB converters.

With OP-COM, you can learn keys to immobiliser, and remote keys to the central door locking, or alarm. Reset and program the following immobiliser related items: ECM, BCM, IPC.
You will need the vehicle security code, which can be found on the CAR-PASS, Service interval reminder on Astra-G, Zafira, Corsa-C, Meriva, Tigra-B, code SAB6, and SAB8 airbags with the software.

HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
You will get a feedback on the state of the activated output. This will helps you to find the failed components more easily.

Print out, save, or copy the fault codes to any other application.
From the fault codes window, you can go directly to the measuring blocks window.
The program will output measuring block information on many control module, you can choose anything from the list on your own. The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
You can also run output tests on many controllers.

Full fault code text description and status information (Present, Not present, Intermittent)

Fault codes will be shown with all available information:

PIN6-PIN14
PIN3-PIN11
PIN1
 HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps

PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)

Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.

- Many Others....

- Body Control Unit

- Electronic Climate Control

- Instrument Cluster

- Engine Cooling module

- Airbag

- ABS

- Automatic Transmission

- Engine

The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test, and supports remote, and key programming.
The program supports many control units, like :

USB Connection to OBD 2 Connector. Works with any PC that has a USB connection.

Also support Saab 9-5 and Saab 9-3 CAN !

Support ALL OPEL VAUXHALL vehicles 1992-2008//9!

OP-COM is a PC based diagnostic program.

It's the lastest version, V2009.07

OP-COM 2009.7

OP-COM 2009.7 >>

Product Name:OP-COM 2009.7
Part No.: 410
Net Weight: 0.5KG

1: It's the lastest version, V2009.07
2: Support ALL OPEL VAUXHALL vehicles 1992-2008//9
3: support Saab 9-5 and Saab 9-3 CAN